Yıllara Göre Yayınlar
Makaleler
Ali Çetin Suyabatmaz, Fatma Tevhide Altekin, and Güvenç Şahin, "Hybrid simulation-analytical modeling approaches for the reverse logistics network design of a third-party logistics provider", Computers & Industrial Engineering, Vol.70, April 2014, 74-89 (SCI)
Anıl Can and Gündüz Ulusoy, "Multi-project scheduling with 2-stage decomposition ", Annals of Operations Research, February 2014 (SCI)
Ayşe Özlem Aykut, Ali Rana Atılgan, and Canan Atılgan, "Designing molecular dynamics simulations to shift populations of the conformational states of calmodulin", PLoS Computational Biology, Vol.9, No.12, December 2013 (SCI)
AKM Bashirul Khoda, İbrahim T. Özbolat, and Bahattin Koç, "Designing heterogeneous porous tissue scaffolds for additive manufacturing processes", Computer-Aided Design, Vol.45, No.12, December 2013, 1507-1523 (SCI)
William Kun Liang, Ahmet Barış Balcıoğlu, and Robert Svaluto, "Scheduling policies for a repair shop problem", Annals of Operations Research, Vol.211, No.1, December 2013, 273-288 (SCI)
İbrahim Muter, Ş. İlker Birbil, and Kerem Bülbül, "Simultaneous column-and-row generation for large-scale linear programs with column-dependent-rows", Mathematical Programming, Vol.142, No.1-2, December 2013, 47-82 (SCI)
Nursen Aydın, Ş. İlker Birbil, Hans Frenk, and Nilay Noyan, "Single-leg airline revenue management with overbooking", Transportation Science, Vol.47, No.4, November 2013, 560-583 (SCI)
AKM Bashirul Khoda and Bahattin Koç, "Functionally heterogeneous porous scaffold design for tissue engineering", Computer-Aided Design, Vol.45, No.11, November 2013, 1276-1293 (SCI)
Vahid Sarhangian and Ahmet Barış Balcıoğlu, "A first passage time problem for spectrally positive Lévy processes and its application to a dynamic priority queue", Operations Research Letters, Vol.41, No.6, November 2013, 659-663 (SCI)
Fatma Başak Aydemir, Akın Günay, Figen Öztoprak, Ş. İlker Birbil, and Pınar Yolum, "Multiagent cooperation for solving global optimization problems: an extendible framework with example cooperation strategies", Journal of Global Optimization (Sl), Vol.57, No.2, October 2013, 499-519 (SCI)
Pedram Sahba, Ahmet Barış Balcıoğlu, and Dragan Banjevic, "Spare parts provisioning for multiple k-out-of-n:G systems", IIE transactions (Sl), Vol.45, No.9, September 2013, 953-963 (SCI)
AKM Bashirul Khoda, İbrahim T. Özbolat, and Bahattin Koç, "Modeling of variational gradient porous architecture with multi-directional filament deposition in 3D scaffolds", Computer-Aided Design & Applications, Vol.10, No.3, August 2013, 445-459
Nilay Noyan and Gabor Rudolf, "Optimization with multivariate conditional value-at-risk constraints", Operations Research, Vol.61, No.4, August 2013, 990-1013 (SCI)
Vahid Sarhangian and Ahmet Barış Balcıoğlu, "Waiting time analysis of multi-class queues with impatient customers", Probability in the Engineering and Informational Sciences, Vol.27, No.3, July 2013, 333-352 (SCI)
Umut Beşikci, Ümit Bilge, and Gündüz Ulusoy, "Resource dedication problem in a multi-project environment", Flexible Services and Manufacturing Journal, Vol.25, No.1-2, June 2013, 206-229 (SCI)
İbrahim T. Özbolat, Michelle Marchany, A. Gardella, Jr., Joseph, and Bahattin Koç, "Computer-aided 4D modeling of hydrolytic degradation in micropatterned bioresorbable membranes", Journal of Medical Devices, Vol.7, No.2, June 2013 (SCI)
Pedram Sahba, Ahmet Barış Balcıoğlu, and Dragan Banjevic, "Analysis of the finite-source multiclass priority queue with an unreliable server and setup time", Naval Research Logistics, Vol.60, No.4, June 2013, 331-342 (SCI)
Kerem Bülbül and Philip Kaminsky, "A linear programming-based method for job shop scheduling", Journal of Scheduling, Vol.16, No.2, April 2013, 161-183 (SCI)
O. İlker Kolak, Orhan Feyzioğlu, Ş. İlker Birbil, Nilay Noyan, and Semih Yalçındağ, "Using emission functions in modeling environmentally sustainable traffic assignment policies", Journal of Industrial and Management Optimization, Vol.9, No.2, April 2013, 341-363 (SCI)
Lütfi Taner Tunç and Erhan Budak, "Identification and modeling of process damping in milling", Journal of Manufacturing Science and Engineering, Vol.135, No.2, April 2013 (SCI)
Kemal Kılıç and Onur Bozkurt, "Computational intelligence based decision support tool for personalized advertisement assignment system", International Journal of Computational Intelligence Systems, Vol.6, No.3, March 2013, 396-410 (SCI)
İbrahim Muter, Ş. İlker Birbil, Kerem Bülbül, Güvenç Şahin, Hüsnü Yenigün, Duygu Taş, and Dilek Tüzün, "Solving a robust airline crew pairing problem with column generation", Computers & Operations Research, Vol.40, No.3, March 2013, 815-830 (SCI)
Patricia Kristine Sheridan, Erich Gluck, Qi Guan, Thomas Pickles, Ahmet Barış Balcıoğlu, and Beno Benhabib, "The dynamic nearest neighbor policy for the multi-vehicle pick-up and delivery problem", Transportation Research Part A: Policy and Practice, Vol.49, March 2013, 178-194 (SCI)
Mustafa Şahin, Gizem Çavuşlar, Temel Öncan, Güvenç Şahin, and Dilek Tüzün Aksu, "An efficient heuristic for the multi-vehicle one-to-one pickup and delivery problem with split loads", Transportation Research Part C: Emerging Technologies (Sl), Vol.27, February 2013, 169-188 (SCI)
Erhan Budak, Alptunç Çomak, and Erdem Öztürk, "Stability and high performance machining conditions in simultaneous milling", CIRP Annals - Manufacturing Technology, Vol.62, No.1 2013, 403-406 (SCI)
Gürdal Ertek and Barbaros Aba, "Lojistik bilişim sistemleri için bir sınıflandırma (taksonomi)", Lojistik, No.25 2013, 27-31
Canan Atılgan, İbrahim İnanç, and Ali Rana Atılgan, "On modifying properties of polymeric melts by nanoscopic particles", Journal of Polymer Science Part B: Polymer Physics, Vol.50, No.23, December 2012, 1653-1662 (SCI)
Gizem Çavuşlar, Bülent Çatay, and Serkan Mehmet Apaydın, "A tabu search approach for the NMR protein structure-based assignment problem", IEEE/ACM Transactions on Computational Biology and Bioinformatics, Vol.9, No.6, December 2012, 1621-1628 (SCI)
Savaş Dayanık and Semih Onur Sezer, "Multisource Bayesian sequential binary hypothesis testing problem", Annals of Operations Research, Vol.201, No.1, December 2012, 99-130 (SCI)
İbrahim T. Özbolat and Bahattin Koç, "3D hybrid wound devices for spatiotemporally controlled release kinetics", Computer Methods and Programs in Biomedicine, Vol.108, No.3, December 2012, 922-931 (SCI)
Muhammed Furkan Uzar and Bülent Çatay, "Distribution planning of bulk lubricants at BP Turkey", Omega - International Journal of Management Science, Vol.40, No.6, December 2012, 870-881 (SCI)
Ali Rana Atılgan and Canan Atılgan, "Local motifs in proteins combine to generate global functional moves", Briefings in Functional Genomics (Sl), Vol.11, No.6, November 2012, 479-488 (SCI)
Hüseyin Topaloğlu, Ş. İlker Birbil, Hans Frenk, and Nilay Noyan, "Tractable open loop policies for joint overbooking and capacity control over a single flight leg with multiple fare classes", Transportation Science, Vol.46, No.4, November 2012, 460-481 (SCI)
M. Pourakbar, J. B. G. Frenk, and R. Dekker, "End-of-life inventory decisions for consumer electronics service parts", Production and Operations Management, Vol.21, No.5, October 2012, 889-906 (SCI)
Tonguç Ünlüyurt and Cenk Aydın, "Improved rehandling strategies for container retrieval process", Journal of Advanced Transportation (Sl), Vol.46, No.4, October 2012, 378-393 (SCI)
A. K. M. Bashirul Khoda and Bahattin Koç, "Designing controllable porosity for multifunctional deformable tissue scaffolds", Journal of Medical Devices - Transactions of ASME, Vol.6, No.3, September 2012 (SCI)
İbrahim Muter, Ş. İlker Birbil, Kerem Bülbül, and Güvenç Şahin, "A note on "A LP-based heuristic for a time-constrained routing problem"", European Journal of Operational Research, Vol.221, No.2, September 2012, 306-307 (SCI)
Ayfer Başar, Bülent Çatay, and Tonguç Ünlüyurt, "A taxonomy for emergency service station location problem", Optimization Letters (Sl), Vol.6, No.6, August 2012, 1147-1160 (SCI)
Mahir Umman Yıldırım and Bülent Çatay, "A time-based pheromone approach for the ant system", Optimization Letters (Sl), Vol.6, No.6, August 2012, 1081-1099 (SCI)
Hossein Abouee-Mehrizi, Ahmet Barış Balcıoğlu, and Opher Baron, "Strategies for a centralized single product multiclass M/G/1 make-to-stock queue", Operations Research, Vol.60, No.4, July 2012, 803-812 (SCI)
Alp Eren Akçay, Gürdal Ertek, and Gülçin Büyüközkan, "Analyzing the solutions of DEA through information visualization and data mining techniques: SmartDEA framework", Expert Systems with Applications, Vol.39, No.9, July 2012, 7763-7775 (SCI)
Sunita Negi, Ayşe Özlem Aykut, Ali Rana Atılgan, and Canan Atılgan, "Calmodulin readily switches conformation upon protonating high pK(a) acidic residues", Journal of Physical Chemistry B, Vol.116, No.24, June 2012, 7145-7153 (SCI)
Lütfi Taner Tunç and Erhan Budak, "Effect of cutting conditions and tool geometry on process damping in machining", International Journal of Machine Tools and Manufacture, Vol.57, June 2012, 10-19 (SCI)
Canan Atılgan, Osman Burak Okan, and Ali Rana Atılgan, "Network-based models as tools hinting at nonevident protein functionality", Annual Review of Biophysics, Vol.41, May 2012, 205-225 (SCI)
İbrahim T. Özbolat, A.K.M.B. Khoda, Michelle Marchany, Joseph A. Gardella, and Bahattin Koç, "Hybrid tissue scaffolds for controlled release applications", Virtual and Physical Prototyping, Vol.7, No.1, April 2012, 37-47
Nilay Noyan, "Risk-averse two-stage stochastic programming with an application to disaster management", Computers & Operations Research, Vol.39, No.3, March 2012, 541-559 (SCI)
Merve Şeker and Nilay Noyan, "Stochastic optimization models for the airport gate assignment problem", Transportation Research Part E: Logistics and Transportation Review, Vol.48, No.2, March 2012, 438-459 (SSCI)
Erhan Budak, Lütfi Taner Tunç, Salih Alan, and H. Nevzat Özgüven, "Prediction of workpiece dynamics and its effects on chatter stability in milling", CIRP Annals - Manufacturing Technology, Vol.61, No.1 2012, 339-342 (SCI)
Michael Ludkovski and Semih Onur Sezer, "Finite horizon decision timing with partially observable Poisson processes", Stochastic Models, Vol.28, No.2 2012, 207-247 (SCI)
Ayhan Demiriz, Gürdal Ertek, Tankut Atan, and Ufuk Kula, "Re-mining item associations: methodology and a case study in apparel retailing ", Decision Support Systems, Vol.52, No.1, December 2011, 284-293 (SCI)
Ayfer Başar, Nihan Özşamlı, Alp Eren Akçay, Gökçe Kahvecioğlu, and Gürdal Ertek, "A taxonomy of supply chain innovations", African Journal of Business Management, Vol.5, No.30, November 2011, 11968-11977
Bülent Çatay, Özgür Özlük, and Tonguç Ünlüyurt, "TestAnt: an ant colony system approach to sequential testing under precedence constraints", Expert Systems with Applications, Vol.38, No.12, November 2011, 14945-14951 (SCI)
Güvenç Şahin and Ravindra K. Ahuja, "Single-machine scheduling with stepwise tardiness costs and release times", Journal of Industrial and Management Optimization, Vol.7, No.4, November 2011, 825-848 (SCI)
Güvenç Şahin and Birol Yüceoğlu, "Tactical crew planning in railways", Transportation Research Part E: Logistics and Transportation Review, Vol.47, No.6, November 2011, 1221-1243 (SCI)
Ali Rana Atılgan, Ayşe Özlem Aykut, and Canan Atılgan, "Subtle pH differences trigger single residue motions for moderating conformations of calmodulin", Journal of Chemical Physics, Vol.135, No.15, October 2011 (SCI)
Gürhan Günday, Gündüz Ulusoy, Kemal Kılıç, and Lütfihak Alpkan, "Effects of innovation types on firm performance", International Journal of Production Economics, Vol.133, No.2, October 2011, 662-676 (SCI)
A. K. M. Khoda, İbrahim T. Özbolat, and Bahattin Koç, "A functionally gradient variational porosity architecture for hollowed scaffolds fabrication", Biofabrication (Special Issue), Vol.3, No.3, September 2011 (SCI)
Gabor Rudolf, Nilay Noyan, David Papp, and Farid Alizadeh, "Bilinear optimality constraints for the cone of positive polynomials", Mathematical Programming, Vol.129, No.1, September 2011, 5-31 (SCI)
İbrahim T. Özbolat and Bahattin Koç, "Multi-directional blending for heterogeneous objects", Computer-Aided Design, Vol.43, No.8, August 2011, 863-875 (SCI)
Erdem Öztürk, Lütfi Taner Tunç, and Erhan Budak, "Analytical methods for increased productivity in five-axis ball-end milling", International Journal of Mechatronics and Manufacturing Systems (IJMMS), Vol.4, No.3/4, July 2011, 238-265
Kerem Bülbül, "A hybrid shifting bottleneck-tabu search heuristic for the job shop total weighted tardiness problem", Computers & Operations Research, Vol.38, No.6, June 2011, 967-983 (SCI)
Bülent Çatay, "Siting new fire stations in Istanbul: a risk-based optimisation approach", OR Insight, Vol.24, No.2, June 2011, 77-89
Bülent Çatay, "İstanbul’da itfaiye istasyonu yer seçiminde risk faktörüne dayalı bir çoklu kapsama yaklaşımı", Endüstri Mühendisliği Dergisi, Vol.22, No.2, June 2011, 33-44
Figen Öztoprak and Ş. İlker Birbil, "A symmetric rank-one Quasi-Newton line-search method using negative curvature directions", Optimization Methods and Software, Vol.26, No.3, June 2011, 455-486 (SCI)
Serkan Mehmet Apaydın, Bülent Çatay, Nicholas Patrick, and Bruce R. Donald, "NVR-BIP: nuclear vector replacement using binary integer programming for NMR structure-based assignments", The Computer Journal, Vol.54, No.5, May 2011, 708-716 (SCI)
Ayfer Başar, Bülent Çatay, and Tonguç Ünlüyurt, "A multi-period double coverage approach for locating the emergency medical service stations in Istanbul", Journal of The Operational Research Society, Vol.62, No.4, April 2011, 627-637 (SCI)
Bahattin Koç and Sridhar Thangaswamy, "Design and analysis of a reconfigurable discrete pin tooling system for molding of three-dimensional free-form objects", Robotics and Computer-Integrated Manufacturing (Sp. Iss. SI), Vol.27, No.2, April 2011, 335-348 (SCI)
Ertunga C. Özelkan, Özkan Öztürk, and Erhan Budak, "Identifying parameters of a broaching design using non-linear optimisation", International Journal of Modelling, Identification and Control (IJMIC), Vol.12, No.3, March 2011, 244-252
Ömer M. Özkırımlı and Erhan Budak, "Process simulation for five-axis machining for generalised milling tools", International Journal of Design Engineering, Vol.3, No.3, March 2011, 232-246
Tamer Doyuran and Bülent Çatay, "A robust enhancement to the Clarke-Wright savings algorithm", Journal of The Operational Research Society, Vol.62, No.1, January 2011, 223-231 (SCI)
Jaap J.L Geluk and Hans J.B.G. Frenk , "Renewal theory for random variables with a heavy tailed distribution and finite variance", Statistics and Probability Letters, Vol.81, No.1, January 2011, 77-82 (SCI)
A. K. M. B. Khoda, İbrahim T. Özbolat, and Bahattin Koç, "Engineered tissue scaffolds with variational porous architecture", Journal of Biomechanical Engineering, Transactions of the ASME, Vol.133, No.1, January 2011 (SCI)
Erhan Budak and E. Öztürk, "Dynamics and stability of parallel turning operations", CIRP Annals - Manufacturing Technology, Vol.60, No.1 2011, 383-386 (SCI)
İbrahim T. Özbolat and Bahattin Koç, "Multi-function based modeling of 3D heterogeneous wound scaffolds for improved wound healing", Computer-Aided Design & Applications, Vol.8, No.1 2011, 43-57
İbrahim T. Özbolat and Bahattin Koç, "A continues multi-material toolpath planning for tissue scaffolds with hollowed features", Computer-Aided Design and Applications, Vol.8, No.2 2011, 237-247
Canan Atılgan, Osman Burak Okan, and Ali Rana Atılgan, "How orientational order governs collectivity of folded proteins", Proteins: Structure, Function, Bioinformatics, Vol.78, No.16, December 2010, 3363-3375 (SCI)
Miguel Lejeune and Nilay Noyan, "Mathematical programming approaches for generating p-efficient points", European Journal of Operational Research, Vol.207, No.2, December 2010, 590-600 (SCI)
Nilay Noyan, "Alternate risk measures for emergency medical service system design", Annals of Operations Research, Vol.181, No.1, December 2010, 559-589 (SCI)
İbrahim T. Özbolat and Bahattin Koç, "Modeling of spatially controlled biomolecules in three-dimensional porous alginate structures", Journal of Medical Devices, Vol.4, No.4, December 2010 (SCI)
Deniz Turgut, Ali Rana Atılgan, and Canan Atılgan, "Assortative mixing in close-packed spatial networks", PLoS One, Vol.5, No.12, December 2010 (SCI)
İbrahim Muter, Ş. İlker Birbil, and Güvenç Şahin, "Combination of metaheuristic and exact algorithms for solving set covering-type optimization problems", Informs Journal on Computing, Vol.22, No.4, November 2010, 603-619 (SCI)
Bülent Çatay, "A new saving-based ant algorithm for the vehicle routing problem with simultaneous pickup and delivery", Expert Systems with Applications, Vol.37, No.10, October 2010, 6809-6817 (SCI)
Canan Atılgan, Z. N. Gerek, S. B. Özkan, and Ali Rana Atılgan, "Manipulation of conformational change in proteins by single-residue perturbations", Biophysical Journal, Vol.99, No.3, August 2010, 933-943 (SCI)
James Servantie, Canan Atılgan, and Ali Rana Atılgan, "Depth dependent dynamics in the hydration shell of a protein", Journal of Chemical Physics, Vol.133, No.8, August 2010 (SCI)
Semih Onur Sezer, "On the Wiener disorder problem", Annals of Applied Probability, Vol.20, No.4, August 2010, 1537-1566 (SCI)
Emre Özlü, Alain Molinari, and Erhan Budak, "Two-zone analytical contact model applied to orthogonal cutting ", Machining Science and Technology, Vol.14, No.3, July 2010, 323-343 (SCI)
Orkun Özşahin, H. Nevzat Özgüven, and Erhan Budak, "Analysis and compensation of mass loading effect of accelerometers on tool point FRF measurements for chatter stability predictions", International Journal of Machine Tools and Manufacture, Vol.50, No.6, June 2010, 585-589 (SCI)
Salih Alan, Erhan Budak, and H. Nevzat Özgüven, "Analytical prediction of part dynamics for machining stability analysis", International Journal of Automation Technology , Vol.4, No.3, May 2010, 259-267
Gürdal Ertek, "Çapraz sevkiyat için temel bilgiler", Lojistik Dergisi, No.13, May 2010, 22-27
Gülçin Büyüközkan, Jbid Arsenyan, and Gürdal Ertek, "Evaluation of e-learning web sites using fuzzy axiomatic design based approach", International Journal of Computational Intelligence Systems, Vol.3, No.1, April 2010, 28-42 (SCI)
Erdem Öztürk and Erhan Budak, "Dynamics and stability of five-axis ball-end milling", Transactions of the ASME Journal of Manufacturing Science and Engineering, Vol.132, No.2, April 2010 (SCI)
Lütfihak Alpkan, Çağrı Bulut, Gürhan Günday, Gündüz Ulusoy, and Kemal Kılıç, "Organizational support for intrapreneurship and its interaction with human capital to enhance innovative performance", Management Decision, Vol.48, No.5-6 2010, 732-755 (SSCI)
Erhan Budak and Lütfi Taner Tunç, "Identification and modeling of process damping in turning and milling using a new approach", CIRP Annals - Manufacturing Technology, Vol.59, No.1 2010, 403-408 (SCI)
Tonguç Ünlüyurt and Endre Boros, "A note on "optimal resource allocation for security in reliability systems"", European Journal of Operational Research, Vol.199, No.2, December 2009, 601-603 (SCI)
Erdem Öztürk, Taner L. Tunç, and Erhan Budak, "Investigation of lead and tilt angle effects in 5-axis ball-end milling processes", International Journal of Machine Tools and Manufacture, Vol.49, No.14, November 2009, 1053-1062 (SCI)
Canan Atılgan and Ali Rana Atılgan, "Perturbation-response scanning reveals ligand entry-exit mechanisms of ferric binding protein", PLoS Computational Biology, Vol.5, No.10, October 2009, 1-14 (SCI)
Erhan Budak and Taner L. Tunç, "A new method for identification and modeling of process damping in machining", Journal of Manufacturing Science and Engineering - Transactions of ASME, Vol.131, No.5, October 2009 (SCI)
Murat Kaya and Özalp Özer, "Quality risk in outsourcing: noncontractible product quality and private quality cost information", Naval Research Logistics, Vol.56, No.7, October 2009, 669-685 (SCI)
Osman Burak Okan, Ali Rana Atılgan, and Canan Atılgan, "Nanosecond motions in proteins impose bounds on the timescale distributions of local dynamics", Biophysical Journal, Vol.97, No.7, October 2009, 2080-2088 (SCI)
Emre Özlü, Erhan Budak, and A. Molinari, "Analytical and experimental investigation of rake contact and friction behavior in metal cutting", International Journal of Machine Tools and Manufacture, Vol.49, No.11, September 2009, 865-875 (SCI)
Güvenç Şahin and Ravindra K. Ahuja, "Lower bounding techniques for the degree-constrained network design problem", Networks, Vol.53, No.4, July 2009, 334-344 (SCI)
Taner L. Tunç and Erhan Budak, "Extraction of 5-axis milling conditions from CAM data for process simulation", International Journal of Advanced Manufacturing Technology, Vol.43, No.5-6, July 2009, 538-550 (SCI)
Hatice Tekiner, Ş. İlker Birbil, and Kerem Bülbül, "Robust crew pairing for managing extra flights", Computers & Operations Research, Vol.36, No.6, June 2009, 2031-2048 (SCI)
Serkan Çiftlikli, Figen Öztoprak, Özgür Erçetin, and Kerem Bülbül, "Distributed algorithms for delay bounded minimum energy wireless broadcasting", International Journal of Interdisciplinary Telecommunications and Networking, Vol.1, No.2, April 2009, 46-65
Nursel Kavlak, Gündüz Ulusoy, Funda Şerifoğlu, and İlker Şevket Birbil, "Client-contractor bargaining on net present value in project scheduling with limited resources", Naval Research Logistics, Vol.56, No.2, March 2009, 93-112 (SCI)
Kerem Bülbül, Özgür Erçetin, and Tonguç Ünlüyurt, "Hop constrained energy-efficient broadcasting: insights from massively dense ad hoc networks", IEEE Transactions on Mobile Computing, Vol.8, No.2, February 2009, 188-202 (SCI)
Ş. İlker Birbil, J.B.G. Frenk, J.A.S. Gromicho, and S. Zhang, "The role of robust optimization in single-leg airline revenue management", Management Science, Vol.55, No.1, January 2009, 148-163 (SCI)
Orkun Özşahin, Alper Ertürk, H. Nevzat Özgüven, and Erhan Budak, "A closed-form approach for identification of dynamical contact parameters in spindle-holder-tool assemblies", International Journal of Machine Tools and Manufacture, Vol.49, No.1, January 2009, 25-35 (SCI)
Erhan Budak, Erdem Öztürk, and Taner L. Tunç, "Modeling and simulation of 5-axis milling processes", CIRP Annals - Manufacturing Technology, Vol.58, No.1 2009, 347-350 (SCI)
Mehmet Kayhan and Erhan Budak, "An experimental investigation of chatter effects on tool life", Proceedings of the Institution of Mechanical Engineers. Part B; Journal of Engineering Manufacture, Vol.223, No.11 2009, 1455-1463 (SCI)
Bülent Çatay, Ayfer Başar, and Tonguç Ünlüyurt, "İstanbul’da acil yardım istasyonlarının yerlerinin planlanması", Endüstri Mühendisliği Dergisi, Vol.19, No.4, December 2008, 20-35
Şule Önsel Şahin, Füsun Ülengin, Gündüz Ulusoy, Emel Aktaş, Özgür Kabak, and Y. İlker Topçu, "A new perspective on the competitiveness of nations", Socio-Economic Planning Sciences, Vol.42, No.4, December 2008, 221-246
Krishna C. Jha, Ravindra K. Ahuja, and Güvenç Şahin, "New approaches for solving the block-to-train assignment problem", Networks, Vol.51, No.issue 1, November 2008, 48-62 (SCI)
Kay-Yut Chen, Murat Kaya, and Özalp Özer, "Dual sales channel management with service competition", Manufacturing and Service Operations Management, Vol.10, No.4, September 2008, 654-675 (SCI)
Canan Atılgan, Güven Demirel, and Ali Rana Atılgan, "Collective behavior of El Farol attendees", Advances in Complex Systems, Vol.11, No.4, August 2008, 629-639 (SCI)
Nilay Noyan and Andrzej Ruszczynski, "Valid inequalities and restrictions for stochastic programming problems with first order stochastic dominance constraints", Mathematical programming, Vol.114, No.2, August 2008, 249-275 (SCI)
Jian Liu, Ravindra K. Ahuja, and Güvenç Şahin, "Optimal network configuration and capacity expansion of railroads", Journal of the Operational Research Society, Vol.59, July 2008, 911-920 (SCI)
Farid Alizadeh, Nilay Noyan, Jonathan Eckstein, and Gabor Rudolf, "Arrival rate approximation by nonnegative cubic splines", Operations Research, Vol.56, No.1, January 2008, 140- 156 (SCI)
Canan Atılgan, Ayşe Özlem Aykut, and Ali Rana Atılgan, "How a vicinal layer of solvent modulates the dynamics of proteins", Biophysical Journal, Vol.94, January 2008, 79-89 (SCI)
Erhan Budak and Emre Özlü, "Development of a thermomechanical cutting process model for machining process simulations", CIRP Annals - Manufacturing Technology, Vol.57, No.1 2008, 97-100 (SCI)
Dilek Çetindamar and Gündüz Ulusoy, "Innovation performance and partnerships in manufacturing firms in Turkey", Journal of Manufacturing Technology Management, Vol.19, No.issue 3 2008, 332-345
Murat Kılıç, Gündüz Ulusoy, and Funda Sivrikaya Şerifoğlu, "A bi-objective genetic algorithm approach to risk mitigation in project scheduling ", International Journal of Production Economics, Vol.112, No.issue 1 2008, 202-216 (SCI)
Emrah Çimren, Bülent Çatay, and Erhan Budak, "Development of a machine tool selection system using AHP", The International Journal of Advanced Manufacturing Technology, Vol.35, No.3-4, December 2007, 363-376 (SCI)
Kemal Kılıç, Özge Uncu, and I. Burhan Türkşen, "Comparison of different strategies of utilizing fuzzy clustering in structure identification", Information Sciences, Vol.177, No.23, December 2007, 5153-5162 (SCI)
Kerem Bülbül and Özgür Erçetin, "Maximum precision-lifetime curve for joint sensor selection and data routing in sensor networks", European Transactions on Telecommunications, Vol.18, No.7, November 2007, 815-823 (SCI)
Özgür Erçetin, Özgür Gürbüz, Kerem Bülbül, Ertuğrul Necdet Çiftçioğlu, and Aylin Aksu, "A practical routing and MAC framework for maximum lifetime sensor telemetry", IEICE Transactions on Telecommunications, Vol.E90-B, No.11, November 2007, 3146-3157 (SCI)
Kerem Bülbül, Philip Kaminsky, and Candace Yano, "Preemption in single machine earliness/tardiness scheduling", Journal of scheduling, Vol.10, No.4-5, October 2007, 271-292 (SCI)
Hakan Göl and Bülent Çatay, "Third party logistics provider selection: insights from a Turkish automotive company", Supply Chain Management: An International Journal, Vol.12, No.6, September 2007, 379-384 (SSCI)
Erhun Ömer Kundakcıoğlu and Tonguç Ünlüyurt, "Bottom-up construction of minimum-cost and/or trees for sequential fault diagnosis", IEEE transactions on systems, man and cybernetics. Part A. Systems and humans, Vol.37, No.5, September 2007, 621-629 (SCI)
Emre Özlü and Erhan Budak, "Analytical modeling of chatter stability in turning and boring operations - Part II: Experimental verification", Journal of manufacturing science and engineering, Vol.129, No.4, August 2007, 733-739 (SCI)
Emre Özlü and Erhan Budak, "Analytical modeling of chatter stability in turning and boring operations - part I: model development", Journal of Manufacturing Science and Engineering, Vol.129, No.4, August 2007, 726-732 (SCI)
Ş. İlker Birbil, J. B. G. Frenk, and G. J. Still, "An elementary proof of the Fritz-John and Karush-Kuhn-Tucker conditions in nonlinear programming", European Journal of Operational Research, Vol.180, No.1, July 2007, 479-484 (SCI)
Alper Ertürk, Erhan Budak, and H. Nevzat Özgüven, "Selection of design and operational parameters in spindle-holder-tool assemblies for maximum chatter stability by using a new analytical model", International journal of machine tools & manufacture, Vol.47, No.9, July 2007, 1401-1409 (SCI)
Erdem Öztürk and Erhan Budak, "Modeling of 5-axis milling processes", Machining science and technology, Vol.11, No.3, July 2007, 287-311 (SCI)
Ali Rana Atılgan, Deniz Turgut, and Canan Atılgan, "Screened nonbonded interactions in native proteins manipulate optimal paths for robust residue communication", Biophysical Journal, Vol.92, No.9, May 2007, 3052-3062 (SCI)
Z. P. Bayındır, Ş. İlker Birbil, and J. B. G. Frenk, "A deterministic inventory/production model with general inventory cost rate function and piecewise linear concave production costs", European Journal of Operational Research, Vol.179, No.1, May 2007, 114-123 (SCI)
Soonyi Wu, Shu-Cherng Fang, and Ş. İlker Birbil, "Solving variational inequalities defined on a domain with infinitely many linear constraints", Computational Optimization and Applications, Vol.37, No.1, March 2007, 67-81 (SCI)
Ali Rana Atılgan, Deniz Turgut, and Canan Atılgan, "A Few designed-in interactions imposed on chain connectivity are sufficient for robust residue communications ", Biophysical Journal , Vol.Suppl S, No.Abstract Issue, January 2007, 217A-218A (SCI)
Canan Atılgan, Ayşe Özlem Sezerman, Çetin Baloğlu, Irmak Sirer, Osman Burak Okan, and Ali Rana Atılgan, "Solvent mobility and surface group flexibility at the dynamical transition", Biophysical Journal, Vol.Suppl S, No.Abstract issue, January 2007, 405A-406A (SCI)
A. Ertürk, H. N. Özgüven, and Erhan Budak, "Effect analysis of bearing and interface dynamics on tool point FRF for chatter stability in machine tools by using a new analytical model for spindle-tool assemblies", International journal of machine tools & manufacture, Vol.47, No.1, January 2007, 23-32 (SCI)
A. Ertürk, H. N. Özgüven, and Erhan Budak, "Analytical modeling of spindle-tool dynamics on machine tools using Timoshenko beam model and receptance coupling for the prediction of tool point FRF", International Journal of Machine Tools and Manufacture, Vol.46, No.15, December 2006, 1901-1912 (SCI)
Pınar Yılmaz and Bülent Çatay, "Strategic level three-stage production distribution planning with capacity expansion", Computers & Industrial Engineering, Vol.51, No.4, December 2006, 609-620 (SCI)
Z. P. Bayındır, Ş. İlker Birbil, and J. B. G. Frenk, "The joint replenishment problem with variable production costs", European Journal of Operational Research, Vol.175, No.1, November 2006, 622-640 (SCI)
Ş. İlker Birbil, Gül Gürkan, and Ovidiu Listeş, "Solving stochastic mathematical programs with complementarity constraints using simulation", Mathematics of operations research, Vol.31, No.4, November 2006, 739-760 (SCI)
Nilay Noyan, Gábor Rudolf, and Andrzej Ruszczynski, "Relaxations of linear programming problems with first order stochastic dominance constraints", Operations research letters, Vol.34, No.6, November 2006, 653-659 (SCI)
Erhan Budak, "Analytical models for high performance milling. Part I: cutting forces, structural deformations and tolerance integrity", International journal of machine tools & manufacture, Vol.46, No.12-13, October 2006, 1478-1488 (SCI)
Erhan Budak, "Analytical models for high performance milling. Part II: process dynamics and stability", International journal of machine tools & manufacture, Vol.46, No.12-13, October 2006, 1489-1499 (SCI)
Nilay Noyan and András Prékopa, "A variant of the Hungarian inventory control model", International journal of production economics, Vol.103, No.2, October 2006, 784-797 (SCI)
Mehmet Barut, Mehmet Bayram Yıldırım, and Kemal Kılıç, "Designing a global multi-disciplinary classroom: a learning experience in supply chain logistics management", International Journal of Engineering Education , Vol.22, No.5, September 2006, 1105-1114 (SCI)
Bülent Çatay, Asoo J. Vakharia, and S. Selçuk Erengüç, "Printed circuit board scheduling in an openshop manufacturing environment", International Journal of Advanced Manufacturing Technology, Vol.29, No.9-10, July 2006, 980-989 (SCI)
Ş. İlker Birbil, G. Bouza, J. B. G. Frenk, and G. Still, "Equilibrium constrained optimization problems", European Journal of Operational Research, Vol.169, No.3, March 2006, 1108-1127 (SCI)
Gürdal Ertek and Ayhan Demiriz, "A framework for visualizing association mining results", Lecture Notes in Computer Science, Vol.4263, January 2006, 593-602 (SCI)
Erhan Budak, A. Ertürk, and H. N. Özgüven, "A Modeling approach for analysis and improvement of spindle-holder-tool assembly dynamics", CIRP Annals - Manufacturing Technology, Vol.55, No.1 2006, 369-372 (SCI)
Alper Ertürk, H. Nevzat Özgüven, and Erhan Budak, "İşleme merkezlerinin dinamik analizi ve süreçte kararlılık: yeni bir analitik modelin uygulamaları", Makina Tasarım ve İmalat Dergisi, Vol.8, No.2 2006, 55-66
Shu-Cherng Fang, Jiye Han, Zheng-Hai Huang, and Ş. İlker Birbil, "On the finite termination of an entropy function based non-interior continuation method for vertical linear complementarity problems", Journal of global optimization, Vol.33, No.3, November 2005, 369-391 (SCI)
Mustafa Tacettin and Tonguç Ünlüyurt, "An alternative proof that exact inference problem in Bayesian belief networks is NP-hard", Lecture notes in computer science, Vol.3733, November 2005, 947-955 (SCI)
Tonguç Ünlüyurt, "Testing systems of identical components", Journal of combinatorial optimization, Vol.10, No.3, November 2005, 261-282 (SCI)
Bülent Çatay, Ş. Selçuk Erengüç, and Asoo J. Vakharia, "Capacity allocation with machine duplication in semiconductor manufacturing", Naval research logistics, Vol.52, No.7, October 2005, 659-667 (SCI)
Ş. İlker Birbil, Shu-Cherng Fang, J.B.G. Frenk, and S. Zhang, "Recursive approximation of the high dimensional max function", Operations Research Letters, Vol.33, No.5, September 2005, 450-458 (SCI)
Alper Tekeli and Erhan Budak, "Maximization of chatter-free material removal rate in end milling using analytical methods", Machining science and technology, Vol.9, No.2, June 2005, 147-167 (SCI)
Özgür Erçetin, Özgür Gürbüz, Kerem Bülbül, and Aylin Aksu, "Joint sensor selection and data routing in sensor networks", Lecture notes in computer science, Vol.3462, May 2005, 828-839 (SCI)
Dilek Çetindamar, Bülent Çatay, and Serdar Osman Basmacı, "Competition through collaboration: insights from an initiative in the Turkish textile supply chain", Supply chain management: an international journal, Vol.10, No.4, April 2005, 238-240 (SCI)
Osman Burak Okan, Ali Rana Atılgan, and Canan Baysal, "Distribution of relaxation times on the pico-nano time scales for a functional protein (ABSTRACT)", Biophysical Journal, Vol.88, No.1, January 2005, 16A-16A (SCI)
Kemal Kılıç, Beth A. Sproule, I. Burhan Türksen, and Claudio A. Naranjo, "A fuzzy system modeling algorithm for data analysis and approximate reasoning ", Robotics and autonomous systems, Vol.49, No.3-4, December 2004, 173-180 (SCI)
Ali Rana Atılgan and Canan Atılgan, "Thermodynamics of residue networks in folded proteins", WSEAS Transactions in Biology and Biomedicine, Vol.1, No.2, September 2004, 205-209
Tonguç Ünlüyurt, "Sequential testing of complex systems: a review", Discrete Applied Mathematics, Vol.142, No.1-3, August 2004, 189-205 (SCI)
Erhan Budak, İsmail Lazoğlu, and Birhan U. Güzel, "Improving cycle time in sculptured surface machining through force modeling", CIRP Annals - Manufacturing Technology, Vol.53, No.1, July 2004, 103-106 (SCI)
Evren Burcu Kıvanç and Erhan Budak, "Structural modeling of end mills for form error and stability analysis", International Journal of Machine Tools and Manufacture, Vol.44, No.11, June 2004, 1151-1161 (SCI)
Funda Sivrikaya Şerifoğlu and Gündüz Ulusoy, "Multiprocessor task scheduling in multistage hyrid flowshops: a genetic algorithm approach", Journal of the Operational Research Society, Vol.55, No.5, May 2004, 504-512 (SCI)
Kerem Bülbül, Philip Kaminsky, and Candace Yano, "Flow shop scheduling with earliness, tardiness and intermediate inventory holding costs", Naval research logistics, Vol.51, No.3, April 2004, 407-445 (SCI)
M. Çağdaş Arslan, Bülent Çatay, and Erhan Budak, "A decision support system for machine selection", Journal of Manufacturing Technology Management, Vol.15, No.1, January 2004, 101-109
Kemal Kılıç, Özge Uncu, and I. Burhan Türkşen, "A comparative analysis of fuzzy system modelling approaches: a case in mining medical diagnostic rules", Lecture notes in computer science, Vol.3339, January 2004, 1194-1199 (SCI)
Kemal Kılıç, Beth Sproule, I. Burhan Türksen, and Claudio A. Naranjo, "Pharmacokinetic applications of fuzzy structure identification and reasoning", Information Sciences, Vol.162 2004, 121-137 (SCI)
Gündüz Ulusoy, "An assessment of supply chain and innovation management practices in the manufacturing industries in Turkey", International Journal of Production Economics, Vol.86, No.3, December 2003, 251-270 (SCI)
Bülent Çatay, Ş. Selçuk Erengüç, and Asoo J. Vakharia, "Tool capacity planning in semiconductor manufacturing", Computers & Operations Research, Vol.30, No.9, August 2003, 1349-1366 (SCI)
Erhan Budak, "An analytical design method for milling cutters with nonconstant pitch to increase stability, part 1: Theory", Journal of manufacturing science and engineering, Vol.125, No.1, February 2003, 29-34 (SCI)
Erhan Budak, "An analytical design method for milling cutters with nonconstant pitch to increase stability, part 2: Application", Journal of manufacturing science and engineering, Vol.125, No.1, February 2003, 35-38 (SCI)
Kitaplar
"Üniversite öğrencileri için motivasyon yöntemleri, GurdalErtek.org: Gürdal Ertek, October 2012
Uluslararası lojistik, Bülent Çatay and Gürkan Öztürk (eds.), Eskişehir: Anadolu Üniversitesi, June 2012
Kitap Bölümleri
Gürdal Ertek, Nihat Kasap, Selin Tokman, Özcan Bilgin, and Mert İnanoğlu, "Competitive pattern-based strategies under complexity: the case of Turkish managers", A Systemic Perspective to Managing Complexity with Enterprise Architecture, Saha Pallab (ed.), Singapore: IGI Global 2014, 301-330
Hans Frenk, Murat Kaya, and Behrooz Pourghannad, "Generalizing the ordering cost and holding-backlog cost rate functions in EOQ-type inventory models", Handbook of EOQ Inventory Problems: Stochastic and Deterministic Models and Applications, Jason Choi (ed.), New York, NY: Springer 2014, 79-119
M. Berke Pamay, Kerem Bülbül, and Gündüz Ulusoy, "Dynamic resource constrained multi-project scheduling problem with weighted earliness/tardiness costs", Essays in Production, Project Planning and Scheduling: A Festschrift in Honor of Salah Elmaghraby, Pakize S. Pulat, Subhash C. Sarin, and Reha Uzsoy (eds.), Berlin: Springer Verlag, December 2013, 219-248
Gürdal Ertek, Dilek Tapucu, and İnanç Arın, "Text mining with RapidMiner", RapidMiner: Data Mining Use Cases and Business Analytics Applications, Markus Hofmann and Ralf Klinkenberg (eds.), Florida, USA: Chapman and Hall/CRC, October 2013, 241-261
Gürdal Ertek, Mete Sevinç, Firdevs Ulus, Özlem Köse, and Güvenç Şahin, "Industrial benchmarking through information visualization and data envelopment analysis: a new framework", Strategic Performance Management and Measurement Using Data Envelopment Analysis, İbrahim Osman, Abdel L. Anouze, and Ali Emrouznejad (eds.), Hershey, PA, USA: IGI Global, August 2013
Gürdal Ertek and Murat Mustafa Tunç, "Re-mining association mining results through visualization, data envelopment analysis, and decision trees", Computational Intelligence Systems in Industrial Engineering, Cengiz Kahraman (ed.), Germany: Atlantis Press/Springer, November 2012, 601-622
Gürdal Ertek, "Depolama sistemleri", Uluslararası Lojistik, Bülent Çatay and Gürkan Öztürk (eds.), Eskişehir: Anadolu Üniversitesi, June 2012, 90-117
Gürdal Ertek, "Lojistik bilişim sistemleri", Uluslararası Lojistik, Bülent Çatay and Gürkan Öztürk (eds.), Eskişehir: Anadolu Üniversitesi, June 2012, 118-150
Güvenç Şahin, "Ulaştırma sistemleri", Uluslararası Lojistik, Bülent Çatay and Gürkan Öztürk (eds.), Eskişehir: Anadolu Üniversitesi Yayınları, June 2012
Gürdal Ertek, Ayhan Demiriz, and Fatih Çakmak, "Linking behavioral patterns to personal attributes through data re-mining", Behavior Computing: Modeling, Analysis, Mining and Decision, Longbing Cao and Philip S. Yu (eds.), Berlin: Springer, April 2012, 197-214
Gürdal Ertek, Murat Kaya, Cemre Kefeli, Özge Onur, and Kerem Uzer, "Scoring and predicting risk preferences", Behavior Computing: Modeling, Analysis, Mining and Decision, Longbing Cao and Philip S. Yu (eds.), Berlin: Springer 2012, 143-163
Gündüz Ulusoy, Sema Nur Altuğ Fayda, and İffet İyigün Meydanlı, "Ar-ge projeleri için proje sonrası analiz ve risk yönetimi süreçleri", Teknik Değişimin Ekonomisi ve Yönetimi, Atilla M. Öner (ed.), İstanbul: Pan Yayıncılık 2012, 413-435
Ahmet Faruk Aysan, Gürdal Ertek, and Seçil Öztürk, "Assessing the adverse effects of Interbank funds on bank efficiency through using semiparametric and nonparametric methods", Financial Services: Efficiency and Risk Management , Meryem Duygun Fethi, Chrysovalantis Gaganis, Fotios Pasiouras, and Constantin Zopounidis (eds.), New York: Nova Science Pub Inc, December 2011, 41-62
Gürdal Ertek, "Crossdocking insights from a third party logistics firm in Turkey", Managing Supply Chains on the Silk Road: Strategy, Performance and Risk, Çağrı Haksöz, Sridhar Seshadri, and Ananth V. Iyer (eds.), United Kingdom: CRC Press, December 2011
Murat Kaya and Çağrı Haksöz, " Borusan Lojistik: winning in the 3PL market ", Managing Supply Chains on the Silk Road: Strategy, Performance and Risk, Çağrı Haksöz, Sridhar Seshadri, and Ananth V. Iyer (eds.), New York, NY, USA: CRC Press, December 2011
Dilek Çetindamar, Bülent Çatay, and Serdar Osman Basmacı, "Performance measurement in supply chain collaboration", Managing Innovation Driven Companies, Hugo Tschirky , Cornelius Herstatt, David Probert, Hans Georg Gemünden, Massimo G. Colombo, Thomas Durand, Petra C. De Weerd-Nederhof, and Tim Schweisfurth (eds.), New York: Palgrave Macmillan, December 2010, 137-158
Erhan Budak, "Dynamic analysis and control", Machining Dynamics: Fundamentals, Applications and Practices, Kai Cheng (ed.), London, England: Springer, January 2009, 21-84
Ş. İlker Birbil, J.B.G. Frenk, Bahar Kaynar, and Nilay Noyan, "Risk measures and their applications in asset management", The VaR Implementation Handbook: Financial Risk and Applications in Asset Management, Measurement, and Modeling, Greg N. Gregoriou (ed.), Columbus, Ohio: The McGraw-Hill Companies 2009, 311-338
Bülent Çatay, "Ant colony optimization and its application to the vehicle routing problem with pickups and deliveries", Natural Intelligence for Scheduling, Planning and Packing Problems, Raymond Chiong and Sandeep Dhakal (eds.), Germany: Springer-Verlag 2009, 219-244
Gürdal Ertek, "Visual data mining for developing competitive strategies in higher education", Data Mining for Business Applications, Cao Longbing, Philip S. Yu, Chengqi Zhang, and Huaifeng Zhang (eds.), New York, NY, USA: Springer 2009, 253-266
Kemal Kılıç, "Kentsel gençlik araştırması anketi bağlamında: gençlerin siyasal eğilimlerini etkileyen faktörler", Gençler Tartışıyor: Siyasete Katılım, Sorunlar ve Çözüm Önerileri, Cemil Boyraz (ed.), İstanbul: TÜSES (Türkiye Sosyal Ekonomik Siyasal Araştırmalar Vakfı) 2009, 29-68
Kerem Bülbül, Gündüz Ulusoy, and Ahmet Şen, "Classic transportation problems", Logistics Engineering Handbook, Don G. Taylor (ed.), Boca Raton, FL, USA: CRC Press 2008, 16/1-16/32
Tamer Doyuran and Bülent Çatay, "Two enhanced savings functions for the Clark-Wright algorithm", Management in Logistics Networks and Nodes: Concepts, Technology and Applications, Thorsten Blecker, Wolfgang Kersten, and Carsten Gertz (eds.), Berlin, Germany: Erich Schmidt Verlag 2008, 245-258
Gürdal Ertek, "Teaching warehousing concepts through interactive animations and 3D models", Facility Logistics: Approaches and Solutions to Next Generation Challenges, Maher Lahmar (ed.), USA: Auerbach, December 2007
Gürdal Ertek, Bilge İncel, and Mehmet Can Arslan, "Impact of crossaisles in a rectangular warehouse: a computational study", Facility Logistics: Approaches and Solutions to Next Generation Challenges, Maher Lahmar (ed.), USA: Auerbach, December 2007
Gündüz Ulusoy, "Disiplinlerarası araştırma ve eğitim", Değişim Çağında Yüksek Öğretim: Global Trendler - Paradigmal Yönelimler, Coşkun Can Aktan (ed.), İzmir: Yaşar Üniversitesi, March 2007, 389-398
Dilek Çetindamar, Bülent Çatay, and Serdar Osman Basmacı, "Improving the performance of technology partnership: a case study in the Turkish textile industry", Handbook of business strategy , Patricia Coate (ed.), New York: Emerald Publishing, September 2005, 319-323
Ravindra K. Ahuja, Claudio B. Cunha, and Güvenç Şahin, "Network flow approaches in railroad planning and scheduling", Tutorials in Operations Research 2005, J. Cole Smith (ed.), Hanover, MD, USA: Institute for Operations Research and the Management Sciences 2005
Konferans Bildirileri
Sarah R. Allen, Lisa Hellerstein, Devorah Kletenik, and Tonguç Ünlüyurt, "Evaluation of DNF formulas", International Symposium on Artificial Intelligence and Mathematics (ISAIM 2014), Boca Raton, FL: Florida Atlantic University, January 2014
Umut Karagüzel, Utku Olgun, Emre Uysal, Erhan Budak, and Mustafa Bakkal, "High performance turning of high temperature alloys on multi-tasking machine tools", Berend Denkena (ed.), 4th Machining Innovations Conference, Switzerland: Springer 2014, 1-9
Ufuk Yiğit, Ender Ciğeroğlu, and Erhan Budak, "Chatter reduction in turning by using piezoelectric shunt circuits", Randall Allemang, James De Clerck, Christopher Niezrecki, and Alfred Wicks (eds.), IMAC-XXXI Conference and Exposition on Structural Dynamics, New York: Springer 2014, 415-420
Gürkan Işık and Tonguç Ünlüyurt, "Sequential testing of 3-level deep series-parallel systems", IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), USA: IEEE (Institute of Electrical and Electronics Engineers), December 2013
Güvenç Şahin and Fardin Dashty Saridarq, "The balanced path problem in crew scheduling applications", 6th Multidisciplinary International Scheduling Conference: Theory and Applications (MISTA), Ghent, Belgium: MISTA, August 2013, 729-732
Murodzhon Akhmedov, Bülent Çatay, and Serkan Mehmet Apaydın, "Distinguishing the type of NOE for NMR protein structure-based assignments", 21st Signal Processing and Communications Applications Conference (SIU 2013), USA: IEEE (Institute of Electrical and Electronics Engineers), June 2013, 1-4
Can Küçükgül, Saime Burçe Özler, Hacer Ezgi Karakaş, Devrim Gözüaçık, and Bahattin Koç, "3D hybrid bioprinting of macrovascular structures", Paulo Bártolo and Paulo Fernandes (eds.), 3rd ECCOMAS Thematic Conference on Tissue Engineering (ICTE 2013), The Netherlands: Elsevier, June 2013, 183-192
Gündüz Ulusoy, Kemal Kılıç, Gürhan Günday, and Lütfihak Alpkan, "What are the determinants leading to innovation in manufacturing firms ", Melih Bulu and Gökçen Arkalı (eds.), 6th International Conference for Entrepreneurship, Innovation and Regional Development (ICEIRD 2013), Istanbul, Turkey: Şehir University, June 2013, 98-108
Nazım Burak Karahanoğlu, Hakan Erdoğan, and Ş. İlker Birbil, "A mixed integer linear programming formulation for the sparse recovery problem in compressed sensing", IEEE International Conference on Acoustics, Speech and Signal Processing (ICASSP 2013), USA: IEEE (Institute of Electrical and Electronics Engineers), May 2013, 5870-5874
Deniz Aslan and Erhan Budak, "Satıh taşlama operasyonunda kuvvet ve sıcaklık modellemesi (Force and temperature modeling for surface grinding operation)", 4. Ulusal Talaşlı İmalat Sempozyumu (UTİS 2013), Izmir, Turkey: Ege University 2013, 359-373
Jeyhun Aslanov, Bülent Çatay, and Serkan Mehmet Apaydın, "An ant colony optimization approach for solving the nuclear magnetic resonance structure based assignment problem", Christian Blum (ed.), 15th Genetic and Evolutionary Computation Conference (GECCO 2013), New York, NY, USA: ACM (Association for Computing Machinery) 2013, 1609-1616
Esma Baytok, Başak Tuna, Ayhan Toprak, Emre Özlü, and Erhan Budak, "Freze ve delik delme işlemlerinde kullanılan karbür takımların sistematik olarak performans karşılaştırması (Performance comparison of milling and drilling carbide tools)", 4. Ulusal Talaşlı İmalat Sempozyumu (UTİS 2013), Izmir, Turkey: Ege University 2013, 185-201
Esin Çakır, Umut Karagüzel, Utku Olgun, Emre Özlü, Mustafa Bakkal, and Erhan Budak, "Dik kesme durumunda kesme sıcaklığının analitik modellenmesi ve deneysel olarak doğrulanması (Modeling of temperature distribution in orthogonal cutting and experimental verfication)", 4. Ulusal Talaşlı İmalat Sempozyumu (UTİS 2013), Izmir, Turkey: Ege University 2013, 129-138
Canan Çapa, Gündüz Ulusoy, and Kemal Kılıç, "A three-phase approach for R&D project scheduling", International IIE (Institute of Industrial Engineers) Conference (IIE 2013): The Global Reach of Industrial Engineering, Norcross, GA: IIE (Institute of Industrial Engineers) 2013
Ceren Çelebi, E. Özlü, and Erhan Budak, "Modeling and experimental investigation of edge hone and flank contact effects in metal cutting", 14th CIRP Conference on Modeling of Machining Operations (CIRP CMMO), Philadelphia, PA, USA: Elsevier 2013, 194-199
A. Çomak, R. Koca, Ö. M. Özkırımlı, and Erhan Budak, "Modeling and simulation based design of variable pitch and variable helix milling tools for increased chatter stability", 7th International Conference and Exhibition on Design and Production of Machines and Dies/Molds, -: Machines and Dies / Molds 2013
Alptunç Çomak, Recep Koca, Emre Özlü, Orkun Özşahin, Erdem Öztürk, Taner Tunç, Emre Uysal, Erhan Budak, and H. Nevzat Özgüven, "Talaşlı imalat süreçlerinin kararlılığı ve takım tezgah dinamiği (Machining process stability and machine tool dynamics)", Gürkan Şakar (ed.), 16. Ulusal Makina Teorisi Sempozyumu (UMTS 2013), Erzurum, Turkey: Ataturk University 2013, 114-124
Soheil Davari and Kemal Kılıç, "The bi-objective equitable preventive healthcare network design", T. Çayırlı, M. M. Günal, E. D. Güneş, and E. L. Örmeci (eds.), Operational Research Applied to Health Services Conference (ORAHS 2013), Istanbul, Turkey: Koc University 2013
AKM Bashirul Khoda, İbrahim T. Özbolat, and Bahattin Koç, "Spatially multi-functional porous tissue scaffold", P. Bartolo and P. Fernandes (eds.), 3rd ECCOMAS Thematic Conference on Tissue Engineering (ICTE), Amsterdam, Netherlands: Elsevier 2013, 174-182
AKM Bashirul Khoda, İbrahim T. Özbolat, and Bahattin Koç, "Functionally gradient tissue scaffold design and deposition path planning for bio-additive processes", 2013 Industrial and Systems Engineering Research Conference, Norcross, GA: IIE (Institute of Industrial Engineers) 2013
Merve Aydan Kılıç and Bülent Çatay, "Scheduling operations for multi-spindle and multi-machining unit machines", The International IIE (Institute of Industrial Engineers) Conference, USA: IIE (Institute of Industrial Engineers) 2013
Recep Koca and Erhan Budak, "Optimization of serrated end mills for reduced cutting energy and higher stability", 14th CIRP Conference on Modeling of Machining Operations (CIRP CMMO), Philadelphia, PA, USA: Elsevier 2013, 570-575
A. Nizamoğulları, Alptunç Çomak, and Erhan Budak, "Paralel tornalama işlevini gerçekleştiren CNC torna tezgahının tasarımı, kesici uç ömrü ve kesme kararlılığı incelemeleri (Cutting tool life, cutting stability and process time review on designed and manufactured CNC turning machine which performs the parallel turning function)", 4. Ulusal Talaşlı İmalat Sempozyumu (UTİS 2013), Izmir, Turkey: Ege University 2013, 339-357
Utku Olgun and Erhan Budak, "Machining of difficult-to-cut-alloys using rotary turning tools", 14th CIRP Conference on Modeling of Machining Operations (CIRP CMMO), Philadelphia, PA, USA: Elsevier 2013, 81-87
Gündüz Ulusoy, Gürhan Günday, Kemal Kılıç, and Lütfihak Alpkan, "Business strategy and innovativeness: results from an empirical study", Christos Emmanouilidis, Marco Taisch, and Dimitris Kiritsis (eds.), APMS 2012 Conference, Advances in Production Management Systems, Berlin: Springer Berlin Heidelberg 2013, 685-692
E. Yasa, A. Orhangül, S. C. Songüler, S. Platin, E. Baytok, E. Özlü, T. Tunç, and Erhan Budak, "Assessment of machinability performance in 5-axis milling of inconel 718 alloy with different carbide grades", 7th International Conference and Exhibition on Design and Production of Machines and Dies/Molds, -: Machines and Dies / Molds 2013
Sunita Negi, Ali Rana Atılgan, and Canan Atılgan, "Driving calmodulin protein towards conformational shift by changing ionization states of selected residues", IUPAP Conference on Computational Physics (CCP 2011), Gatlinburg, Tennessee: Institute of Physics, December 2012
Gürdal Ertek, Nazlı Akyurt, and Gamze Tillem, "DEA-based benchmarking models in supply chain management: an application-oriented literature review", Güner Gürsoy and Mehmet Tanyaş (eds.), X. International Logistics & Supply Chain Congress 2012, Istanbul: Istanbul Kemerburgaz University & Logistics Association (LODER) & Ideal Kultur Publishing, November 2012, 200-218
Umut Karagüzel, Mustafa Bakkal, and Erhan Budak, "Process modeling of turn-milling using analytical approach", Eiji Shamato (ed.), 3rd CIRP Conference on Process Machine Interactions, Nagoya, Japan: Elsevier, November 2012, 131-139
AKM B. Khoda and Bahattin Koç, "Functionally heterogeneous porous scaffold design for tissue engineering ", ASME 2012 International Mechanical Engineering Congress & Exposition (IMECE2012), Houston, Texas, USA: ASME (American Society of Mechanical Engineers), November 2012
AKM B. Khoda, İbrahim T. Özbolat, and Bahattin Koç, "Modeling of multifunctional porous tissue scaffolds with continuous deposition path plan", ASME 2012 International Mechanical Engineering Congress & Exposition (IMECE2012), USA: ASME (American Society of Mechanical Engineers), November 2012
İbrahim T. Özbolat, AKMB Khoda, and Bahattin Koç, "Bioadditive manufacturing of hybrid tissue scaffolds for controlled release kinetics", ASME 2012 International Mechanical Engineering Congress & Exposition (IMECE2012), USA: ASME (American Society of Mechanical Engineers), November 2012
Erhan Budak, "Suppression of chatter vibrations in simultaneous machining operations", 15th International Machine Tool Engineers' Conference (IMEC), Tokyo, Japan: Japan Machine Tool Builders' Association, October 2012
Alptunç Çomak and Erhan Budak, "Eşzamanlı frezeleme operasyonlarının dinamiği ve kararlılığı", Ulvi Şeker (ed.), 3. Ulusal Talaşlı İmalat Sempozyumu (UTIS 2012), Ankara, Türkiye: Gazi Üniversitesi, October 2012
Aytaç Göğüş and Gürdal Ertek, "Statistical scoring algorithm for learning and study skills", Aytekin İsman (ed.), 3rd International Conference on New Horizons in Education - INTE 2012, Prague, Czech Republic: Elsevier, October 2012, 882-886
Erhan Budak, "Improving 5-axis milling operations using process models", Petr Kolar (ed.), 9th International Conference on Machine Tools, Automation, Technology and Robotics (MATAR 2012), Prag, Czech Republic: MM Science Journal, September 2012
Gürdal Ertek, Murat Mustafa Tunç, Ece Kurtaraner, and Doğancan Kebüde, "Insights into the efficiencies of on-shore wind turbines: a data-centric analysis", International Symposium on Innovations in Intelligent Systems and Applications (INISTA 2012), USA: IEEE (Institute of Electrical and Electronics Engineers), July 2012, 1-7
Orkun Özşahin, Erhan Budak, and H. Nevzat Özgüven, "Analytical modeling of the machine tool spindle dynamics under operational conditions", Srichand Hinduja and Lin Li (eds.), 37th International MATADOR Conference, Germany: Springer, July 2012, 117-122
Alptunç Çomak and Erhan Budak, "Chatter stability of parallel milling operations", 15. Uluslararası Makina Tasarım ve İmalat Kongresi (UMTİK 2012), Ankara, Turkey: METU (Middle East Technical University), June 2012
Emre Özlü, Lütfi Taner Tunç, İpek Güven, and Erhan Budak, "Industrial applications of science integrated machining approach", Engin Kılıç (ed.), 15. Uluslararası Makina Tasarım ve İmalat Kongresi (UMTİK 2012), Ankara, Turkey: METU (Middle East Technical University), June 2012
Esin Çakır, Emre Özlü, Mustafa Bakkal, and Erhan Budak, "Modeling of temperature distribution in orthogonal cutting with dual-zone contact at rake face", 1st International Conference on Virtual Machining Process Technology (VMPT), Montreal, Canada: Ecole Polytechnic, May 2012
AKM Bashirul Khoda and Bahattin Koç, "Conformal tissue scaffold with multi-functional porosity for wound healing", 1st International Conference on Design and Processes for Medical Devices (PROMED 2012), Italy: Brescia University, May 2012, 325-328
AKM Bashirul Khoda and Bahattin Koç, "Multi-functional variational porosity in bone tissue scaffolds", 1st International Conference on Design and Processes for Medical Devices (PROMED 2012), Italy: Brescia University, May 2012, 329-332
AKM Khoda and Bahattin Koç, "Designing bio-mimetic variational porosity for tissue scaffolds", G. Lim and J. W. Herrmann (eds.), 2012 Industrial and Systems Engineering Research Conference (ISERC 2012), USA: IIE, May 2012
AKM Khoda and Bahattin Koç, "Modeling of multifunctional deformable porous scaffolds for soft tissue engineering", G. Lim and J. W. Herrmann (eds.), 2012 Industrial and Systems Engineering Research Conference (ISERC 2012), USA: IIE, May 2012
Halil Şen and Kerem Bülbül, "A simple, fast, and effective heuristic for the single-machine total weighted tardiness problem", 13th International Conference on Project Management and Scheduling (PMS 2012), Leuven, Belgium: Katholieke Universiteit Leuven, April 2012, 282-286
Canan Atılgan, İbrahim İnanç, and Ali Rana Atılgan, "Effect of van der Waals interaction strength and nanocluster size on the dynamical and mechanical properties of 1,4-cis-polybutadiene melts", Materials Research Society Fall Meeting 2011 , Boston: Materials Research Society, February 2012
Gürdal Ertek, Ahmetcan Erdoğan, Volkan Patoğlu, Murat Mustafa Tunç, Ceysu Çitak, and Tuğçe Vanlı, "Encapsulating and representing the knowledge on the evaluation of an engineering system", ASME 2012 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE 2012), Chicago, USA: ASME (American Society of Mechanical Engineers) 2012
Kemal Kılıç and Jorge Casillas, "Hybrid genetic-fuzzy system modeling application in innovation management", Jorge Casillas, Francisco J. Martínez-López, and Juan Manuel Corchado Rodríguez (eds.), International Symposium on Management Intelligent Systems, Germany: Springer Berlin Heidelberg 2012, 25-34
Ali Çetin Suyabatmaz and Güvenç Şahin, "A column-and-row generation algorithm for a crew planning problem in railways", Diethard Klatte, Hans-Jakob Lüthi, and Karl Schmedders (eds.), International Conference on Operations Research (OR 2011), Berlin Heidelberg: Springer-Verlag 2012, 335-340
Engin Yeşil, Murat Kaya, and Sarven Sıradağ, "Fuzzy forecast combiner design for fast fashion demand forecasting", International Symposium on Innovations in Intelligent Systems and Applications (INISTA 2012), USA: IEEE (Institute of Electrical and Electronics Engineers) 2012, 1-5
Temel Öncan, Dilek Tüzün Aksu, Güvenç Şahin, and Mustafa Şahin, "A branch and cut algorithm for the multi-vehicle one-to-one pickup and delivery problem with split loads", IEEE International Conference on Industrial Engineering and Engineering Management (IEEM 2011), USA: IEEE (Institute of Electrical and Electronics Engineers), December 2011, 1864-1868
Umut Beşikçi , Ümit Bilge, and Gündüz Ulusoy, "Different resource management policies in multi-mode resource constrained multi-project scheduling", Mengqi Zhou (ed.), 2011 World Congress on Engineering and Technology, USA: Institute of Electrical and Electronics Engineers, Inc., November 2011, 64-67
Lütfi Taner Tunç and Erhan Budak, "Effect of cutting conditions and tool geometry on process damping in machining", K. Bouzakis (ed.), 4th International Conference on Manufacturing Engineering (ICMEN2011), Thessaloniki, Greece: Aristoteles University of Thessaloniki , October 2011
Erdal Mutlu, Ş. İlker Birbil, Kerem Bülbül, and Hüsnü Yenigün, "High level rule modeling language for airline crew pairing", T. E. Simos (ed.), International Conference on Numerical Analysis and Applied Mathematics (ICNAAM 2011), Melville, New York: AIP (American Institute of Physics), September 2011, 798-801
Semih Atakan, Birce Tezel, Kerem Bülbül, and Nilay Noyan, "Minimizing value-at-risk in the single-machine total weighted tardiness problem", 5th Multidisciplinary International Conference on Scheduling: Theory and Applications (MISTA 2011), Phoenix, Arizona, USA: MISTA 2011, August 2011, 215-229
Umut Beşikçi, Ümit Bilge, and Gündüz Ulusoy, "Resource preference based improvement heuristics for resource portfolio problem", Yavuz Günalay and Şükran Kadıpaşaoğlu (eds.), Third International Conference on Applied Operational Research ICAOR’11, Vancouver, Canada: Tadbir, Vancouver, Canada, August 2011, 313-322
Mehmet Arabacı, Armağan Aktuğ, and Gürdal Ertek, "Actionable insights through association mining of exchange rates: a case study", International Symposium on Innovations in Intelligent Systems and Applications (INISTA 2011), USA: IEEE (Institute of Electrical and Electronics Engineers), July 2011, 101-106
Esma Nur Çinicioğlu, Gürdal Ertek, Deniz Demirer, and Ersin Hasan Yörük, "A framework for automated association mining over multiple databases", International Symposium on Innovations in Intelligent Systems and Applications (INISTA 2011), USA: IEEE (Institute of Electrical and Electronics Engineers), July 2011, 79-85
Ömer M. Özkırımlı, Taner L. Tunç, and Erhan Budak, "Simulation of multi-axis machining processes using z-mapping technique", Bilgin Kaftanoğlu and Erhan Budak (eds.), 6th International Conference and Exhibition on Design and Production of Machines and Dies/Molds, Ankara, Turkey: Atılım University, June 2011
Orkun Özşahin, Erhan Budak, and Nevzat H. Özgüven, "Investigating dynamics of machine tool spindles under operational conditions", J. C. Outeiro (ed.), 13th CIRP Modeling of Machining Operations, Switzerland: Trans Tech Publications, May 2011, 610-621
Kemal Kılıç and Caner Hamarat, "A DSS for innovation management: the significance of the innovation determinants", 2nd International Conference on Industrial Engineering and Operations Management (IEOM 2011), Kuala Lumpur, Malaysia: IEOM Research Solutions Pty Ltd., January 2011, 439-444
Volkan Aran and Erhan Budak, "An experimental study on dynamics and stability of miniature end mills", J. C. Outeiro (ed.), 13th CIRP Conference on Modelling of Machining Operations, Zurich, Switzerland: Trans Tech Publications 2011, 869-878
Ayşe Özlem Aykut, Ali Rana Atılgan, and Canan Atılgan, "Molecular recognition mechanisms of calmodulin examined by perturbation-response scanning", 2010 MRS Fall Meeting, UK: Cambridge University Press Academic and Professional Books 2011
A. K. M. B. Khoda, I. T. Özbolat, and Bahattin Koç, "Modeling and fabrication of hollowed scaffolds with interconnected variational porosity architecture", International Mechanical Engineering Congress & Exposition (IMECE 2011), New York, USA: ASME (American Society of Mechanical Engineers) 2011
A. K. M. B. Khoda, I. T. Özbolat, and Bahattin Koç, "Continuous path planning for variational porosity in hollowed scaffold fabrication", Annual Industrial Engineering Research Conference (IERC 2011), Norcross, GA: IIE (Institute of Industrial Engineers) 2011
A. K. M. B. Khoda, I. T. Özbolat, and Bahattin Koç, "Spatially varying porosity with continuous path plan for hollowed tissue scaffolds", 5th International Conference on Advanced Research in Virtual and Rapid Prototyping, Lisbon, Portugal: VRAP 2011
O. İlker Kolak, Darçın Akın, Ş. İlker Birbil, Orhan Feyzioğlu, and Nilay Noyan, "Multicriteria sustainability evaluation of transport networks for selected European countries ", World Congress on Engineering 2011 (WCE 2011), London, UK: WCE (World Congress on Engineering) 2011, 117-122
I. T. Özbolat, A. K. M. B. Khoda, M. Marchany, J. A. Gardella, and Bahattin Koç, "Heterogeneous tissue scaffolds for spatiotemporally controlled release kinetics", 5th International Conference on Advanced Research in Virtual and Rapid Prototyping, Lisbon, Portugal: VRAP 2011
I. T. Özbolat and Bahattin Koç, "Multi-material blending for complex-shaped heterogeneous objects", 5th International Conference on Advanced Research in Virtual and Rapid Prototyping, Lisbon, Portugal: VRAP 2011
I. T. Özbolat and Bahattin Koç, "3D engineered wound scaffolds for spatiotemporally controlled release kinetics", Annual Industrial Engineering Research Conference (IERC 2011), Norcross, GA: IIE (Institute of Industrial Engineers) 2011
I. T. Özbolat and Bahattin Koç, "A new toolpath planning in solid freeform fabrication for hollowed objects", Annual Industrial Engineering Research Conference (IERC 2011), Norcross, GA: IIE (Institute of Industrial Engineers) 2011
I. T. Özbolat and Bahattin Koç, "Multi-directional material blending for heterogenous object modeling", Annual Industrial Engineering Research Conference (IERC 2011), Norcross, GA: IIE (Institute of Industrial Engineers) 2011
Elif Özden Yenigün, Ali Rana Atılgan, Kaan Bilge, Yusuf Z. Menceloğlu, Canan Atılgan, and Melih Papila, "Designed-in molecular interactions lead to superior thermo-mechanical properties in nanocomposites", 2010 MRS Fall Meeting, UK: Cambridge University Press Academic and Professional Books 2011
Recep Akçay, Emre K. Memiş, Emre Özlü, and Erhan Budak, "Havacılık sanayinde süreç optimizasyonu için kararlılık diyagramlarının kullanımı", 2. Ulusal Talaşlı İmalat Sempozyumu (UTIS 2010), Konya, Türkiye: Selçuk Üniversitesi, October 2010
Erdem Öztürk and Erhan Budak, "Modeling dynamics of parallel turning operations", 4th CIRP International Conference on High Performance Cutting (HPC 2010), Paris, France: CIRP, October 2010
Önder Tombuş, Gürdal Ertek, Ceren Atay, Gizem Kökten, and Ayşe Cilacı Tombuş, "A new network flow model for determining the assortment of roll types in packaging industry", 2010 IEEE International Conference on Systems, Man, and Cybernetics (SMC2010), USA: IEEE (Institute of Electrical and Electronics Engineers), October 2010
Taner L. Tunç, Ömer Mehmet Özkırımlı, Erdem Öztürk, Yavuz Murtezaoğlu, and Erhan Budak, "Machining strategy development in 5-axis milling operations using process models", 4th CIRP International Conference on High Performance Cutting (HPC 2010), Paris, France: CIRP, October 2010
Mehmet Çağrı Çalpur, Hakan Erdoğan, Bülent Çatay, Bruce R. Donald, and Mehmet Serkan Apaydın, "Developing a scoring function for NMR structure-based assignments using machine learning", Erol Gelenbe, Ricardo Lent, Georgia Sakellari, Ahmet Sacan, Hakkı Toroslu, and Adnan Yazıcı (eds.), 25th International Symposium on Computer and Information Sciences, Netherlands: Springer, September 2010, 87-90
Volkan Patoğlu, Gürdal Ertek, Özgür Öz, Deniz Zoroğlu, and Gül Okudan Kremer, "Design requirements for a tendon rehabilitation robot: results from a survey of engineers and health professionals", ASME 2010 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE 2010), New York, USA: ASME (American Society of Mechanical Engineers), August 2010
Ayhan Demiriz, Gürdal Ertek, Tankut Atan, and Ufuk Kula, "Re-mining positive and negative association mining results", Petra Perner (ed.), 10th Industrial Conference on Data Mining ICDM 2010, Germany: Springer, July 2010, 101-114
Ömer Mehmet Özkırımlı and Erhan Budak, "Process simulation for 5-axis machining using generalized milling tool geometries", 14. Uluslararası Makina Tasarım ve İmalat Kongresi (UMTİK 2010), Ankara, Türkiye: Ortadoğu Teknik Üniversitesi, July 2010
Erdem Öztürk and Erhan Budak, "Tool orientation effects on the geometry of 5-axis ball-end milling", Srichand Hinduja and Lin Li (eds.), 36th International Matador Conference, Berlin, Germany: Springer, July 2010, 243-246
Recep Akçay, Emre K. Memiş, Emre Özlü, and Erhan Budak, "Increasing productivity in high speed milling of airframe components using chatter stability diagrams", Yusuf Altıntaş (ed.), 2nd International CIRP Conference on Process Machine Interactions (PMI 2010), Paris, France: CIRP, June 2010
Gürdal Ertek and Alp Eren Akçay, "Kimya sanayinde su tasarrufu için karar destek sistemi", İ.T.Ü. 12. Endüstriyel Kirlenme Kontrolü Sempozyumu, Istanbul, Turkey: İTÜ İnşaat Fakültesi, June 2010
Emre Özlü, Şerafettin Engin, Cristina Cook, Tahany El-Wardany, and Erhan Budak, "Simulation of broaching operations for tool design optimization ", 2nd International CIRP Conference on Process Machine Interactions (PMI 2010), Paris, France: CIRP, June 2010
Erdem Öztürk and Erhan Budak, "Modeling dynamics of parallel milling processes in time-domain", Yusuf Altıntaş (ed.), 2nd International CIRP Conference on Process Machine Interactions (PMI 2010), Paris, France: CIRP, June 2010
Umut Beşikci, Ümit Bilge, and Gündüz Ulusoy, "Resource dedication problem in a multi-project environment", Vincent T'kindt (ed.), 12th International Conference on Project Management and Scheduling, Tours, France: Universite François-Rabelais de Tours, April 2010, 107-110
Canan Atılgan, İbrahim İnanç, and Ali Rana Atılgan, "Long-range structural regularities and collectivity of folded proteins", P. Levitz, R. Metzler, and D. Reichman (eds.), 2009 MRS Fall Meeting, Warrendale, PA: MRS (Materials Research Society) 2010
C. Hamarat and Kemal Kılıç, "A genetic algorithm based feature weighting methodology", The 40th International Conference on Computers & Industrial Engineering (CIE40), Japan: Kobe Gakuin University 2010
Kemal Kılıç and C. Hamarat, "A decision support system framework for innovation management", The 5th IEEE International Conference on Management of Innovation and Technology (ICMIT 2010), USA: IEEE (Institute of Electrical and Electronics Engineers) 2010, 765-770
I. T. Özbolat, A. K. M. Bashir Khoda, and Bahattin Koç, "Toolpath optimization in solid freeform modeling and fabrication of tissue scaffolds", Annual Industrial Engineering Research Conference (IERC 2010), Norcross, GA: IIE (Institute of Industrial Engineers) 2010
I. T. Özbolat and Bahattin Koç, "Spatially controlled bio-molecules in 3D porous structures", Annual Industrial Engineering Research Conference (IERC 2010), Norcross, GA: IIE (Institute of Industrial Engineers) 2010
Serkan Mehmet Apaydın, Bülent Çatay, Nicholas Patrick, and Bruce R. Donald, "NVR-BIP: nuclear vector replacement using binary integer programming for NMR structure-based assignments", 24th International Symposium on Computer and Information Sciences (ISCIS09), USA: IEEE (Institute of Electrical and Electronics Engineers), September 2009, 177-182
Bülent Çatay, "A risk-based multiple coverage model for locating fire stations in Istanbul", XIII Meeting of the EURO Working Group on Transportation: "Advances in Transportation Systems Analysis" (EWGT 2009), Padua, Italy: Padova University Press, September 2009
Tonguç Ünlüyurt and Cenk Aydın, "Rehandling strategies for container retrieval", 13th Euro Working Group on Transportation Meeting (EWGT2009), Padua, Italy: University of Padova, September 2009
Ayfer Başar, Bülent Çatay, and Tonguç Ünlüyurt, "A new model and tabu search approach for planning the emergency service stations", Bernhard Fleischmann, Karl Heinz Borgwardt, Robert Klein, and Axel Tuma (eds.), Annual International Conference of the German Operations Research Society, 2008, Berlin Heidelberg: Springer, August 2009, 41-46
Mahir Umman Yıldırım and Bülent Çatay, "An ant colony algorithm for time-dependent vehicle routing problem with time windows", Bernhard Fleischmann, Karl-Heinz Borgwardt, Robert Klein, and Axel Tuma (eds.), Annual International Conference of the German Operations Research Society, 2008, Berlin Heidelberg: Springer, August 2009, 337-342
Elvin Çoban, İbrahim Muter, Duygu Taş, Ş. İlker Birbil, Kerem Bülbül, Güvenç Şahin, Y. İlker Topçu, Dilek Tüzün, and Hüsnü Yenigün, "Column generation approaches to a robust airline crew pairing model for managing extra flights", Bernhard Fleischmann , Karl Heinz Borgwardt, Robert Klein, and Axel Tuma (eds.), Operations Research 2008: OR and Global Business, Germany: Springer, June 2009, 439-444
Erdem Öztürk, Ömer Mehmet Özkırımlı, Gökhan Süren, Erhan Budak, and B. Aksu, "Increasing productivity in die machining through process modelling", 5th International Conference and Exhibition on Design And Production of Machines And Dies/Molds, Kuşadası, Aydın, Türkiye: CIRP (International Academy for Production Engineering), June 2009
Gündüz Ulusoy, Gürhan Günday, Kemal Kılıç, and Lütfihak Alpkan, "An empirical study into the determinants of innovativeness in manufacturing firms", 3rd International Conference on Innovation, Technology and Knowledge Economics, Ankara, Turkey: Middle East Technical University Science and Technology Policies Research Center, June 2009
Akın Günay, Figen Öztoprak, Ş. İlker Birbil, and Pınar Yolum, "Solving global optimization problems using MANGO", A. Hakansson, N. T. Nguyen, R. L. Hartung, R. J. Howlett, and L. C. Jain (eds.), 3rd KES International Symposium on Agent and Multi-Agent Systems, Germany: Springer 2009, 783-792
Taehyun Kim, Gül Okudan, and Gürdal Ertek, "Innovation in product form and function: customer perception of their value", ASME 2009 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE 2009), New York, USA: ASME (American Society of Mechanical Engineers) 2009
Emre Özlü and Erhan Budak, "Process modeling of orthogonal cutting with hone radiused tools ", 12th CIRP Conference on Modeling and Machining Operations, San Sebastian, Spain: CIRP (International Academy for Production Engineering) 2009
Orkun Özşahin, H. Nevzat Özgüven, and Erhan Budak, "Mass loading effect of accelerometers on tool point FRF and stability diagrams ", 12th CIRP Conference on Modeling and Machining Operations, San Sebastion, Spain: CIRP (International Academy for Production Engineering) 2009
Gündüz Ulusoy, Gürhan Günday, Lütfihak Alpkan, and Kemal Kılıç, "Effects of organizational innovations on firm's production performance", Min Xie and Roger Jiao (eds.), 2008 IEEE International Conference on Industrial Engineering and Engineering Management, USA: IEEE (Institute of Electrical and Electronics Engineers), December 2008, 321-325
Ahmet Şen and Kerem Bülbül, "A survey on multi trip vehicle routing problem", VI. International Logistics & Supply Chain Congress 2008 (6. Lojistik ve Tedarik Zinciri Kongresi), İstanbul, Türkiye: İstanbul Bilgi Üniversitesi, November 2008, 401-407
Burak Aksu, Emre Özlü, and Erhan Budak, "Analysis and modeling of edge forces in orthogonal cutting", International Conference on Manufacturing Engineering, Greece:, September 2008
Erhan Budak and Taner L. Tunç, "A new method for identification and modeling of process damping in machining", First International Conference on Process Machine Interactions, Hannover, Germany: Leibniz Universität , September 2008
Gürhan Günday, Gündüz Ulusoy , Kemal Kılıç, and Lütfihak Alpkan, "Modeling innovation: determinants of innovativeness and the impact of innovation on firm performance ", Tritos Laosirihongthong and Min Xie (eds.), The 4th IEEE International Conference on Management of Innovation and Technology, USA: IEEE, September 2008, 766-771
Bülent Çatay, "An ant colony algorithm for the mixed vehicle routing problem with backhauls", 3rd World Conference on Production and Operations Management, Tokyo, Japan: on CD-ROM, August 2008, 2653-2661
Ayfer Başar, Bülent Çatay, and Tonguç Ünlüyurt, "Acil yardım istasyonu yerlerinin planlamasında bir tabu arama yaklaşımı", Yöneylem Araştırması ve Endüstri Mühendisliği 28. Ulusal Kongresi (YA/EM'08), İstanbul: Yöneylem Araştırması Derneği 2008
Bülent Çatay, Özgür Özlük, and Tonguç Ünlüyurt, "An ant colony algorithm for the sequential testing problem under precedence constraints", 2008 IEEE International Conference on Service Operations and Logistics, and Informatics, USA: IEEE (Institute of Electrical and Electronics Engineers) 2008, 1800-1805
Gürhan Günday, Gündüz Ulusoy, Kemal Kılıç, and Lütfihak Alpkan, "An integrated innovation model: how innovations are born and what are their impacts on firm performance?", Taco Van der Vaart and Dirk Pieter Van Donk (eds.), 15th International Annual EUROMA Conference, Gröningen, Hollanda: University of Gröningen 2008, 92-101
Kemal Kılıç, "Personalized advertisement system based on computational intelligence", W. Zhao (ed.), 11th Joint Conference on Information Sciences, Paris, France: Atlantis Press 2008, U665-U670
Figen Öztoprak and Ş. İlker Birbil, "Implementation of a fixing strategy and parallelization in a recent global optimization method ", Euro Mini Conference on Continuous Optimization and Knowledge-Based Technologies (EurOPT-2008), Holland: Elsevier 2008
Ersin Demirok and Bülent Çatay, "Vehicle routing problem with simultaneous delivery and pick-up and intermediary delivery", 5th International Logistics & Supply Chain Congress, Istanbul: Okan University and Logistics Association, November 2007, 407-414
İlkan Sarıgöl and Bülent Çatay, "A clustering based heuristic for location routing problems", 5th International Logistics & Supply Chain Congress, Istanbul: Okan University and Logistics Association, November 2007, 415-422
Canan Atılgan, Güven Demirel, and Ali Rana Atılgan, "Landscape Dynamics of El Farol Attendees", The 2007 International Conference of the System Dynamics Society, Boston, Massachusetts, USA: System Dynamics Society, October 2007
Erhan Budak, Bülent Çatay, İbrahim Tekin, Hüsnü Yenigün, Mehmet Abbak, Sergey Drannikov, and Oya Şimşek, "Design of an RFID-based manufacturing monitoring and analysis system", RFID Eurasia, Istanbul: Istanbul Technical University, September 2007, 259-264
Erhan Budak, Bülent Çatay, İbrahim Tekin, Hüsnü Yenigün, Mehmet Abbak, and Sergey Drannikov, "Microstrip patch antenna for RFID applications", RFID Eurasia, Istanbul, Turkey: Istanbul Technical University, September 2007, 265-267
Erhan Budak, "Machining stability and machine tool dynamics", S. Ekinovic (ed.), 11th International Research/Expert Conference " Trends in the Development of the Machinery and Associated Technology", Bosnia: Univ. of Zenica, August 2007
Emre Özlü, Erhan Budak, and Alain Molinari, "Thermomechanical modeling of orthogonal cutting including the effect of stick-slide regions on the rake face", Fabrizio Micari and Luigino Filice (eds.), 10th CIRP INternational Workshop on Modeling of Machining OPerations, Calabria, Italy: University of Calabria, August 2007
Erdem Öztürk, Emre Özlü, and Erhan Budak, "Modeling dynamics and stability of 5-axis milling processes", Fabrizio Micari and Luigino Filice (eds.), 10th CIRP INternational Workshop on Modeling of Machining OPerations, Calabria, Italy: University of Calabria, August 2007
Taner Tunc and Erhan Budak, "Optimization of 5-Axis milling processes based on the process models with application to airfoil machining", Fabrizio Micari and Luigino Filice (eds.), 10th CIRP International Workshop on Modeling of Machining OPerations, Calabria, Italy: University of Calabria, August 2007
Emre Özlü and Erhan Budak, "Experimental analysis and modeling of orthogonal cutting using material and friction models ", Bilgin Kaftanoglu, Erhan Budak, Metin Akkok, and Mehmet Fırat (eds.), 4th International Conference and Exhibition on Machines and Design and Production of Dies and Molds, Ankara, Turkey: METU, June 2007
Gündüz Ulusoy, Dilek Çetindamar, Hande Yeğenoğlu, and Çağrı Bulut, "An Empirical study on the competitiveness and innovation in four sectors of the Turkish manufacturing industry", Nuran Acur, Nesim Erkip, and Evrim Didem Güneş (eds.), The 14th International Annual EurOMA Conference, Ankara: Bilkent University, June 2007, 438-447
Füsun Ülengin, Özgür Kabak, Şule Önsel, Emel Aktaş, and Gündüz Ulusoy, "International competitiveness power and human development of countries", 14th International EurOMA Conference, Bilkent, Ankara, Turkey: European Operations Management Association, June 2007
Kerem Bülbül, Özgür Erçetin, and Tonguç Ünlüyurt, "Delay constrained minimum power broadcasting in wireless networks", 5th International Symposium on Modeling and Optimization in Mobile, Ad Hoc, and Wireless Networks Program (WiOPT 2007), Limassol, Cyprus: ICST, April 2007, 1-9
Gündüz Ulusoy and Hande Yeğenoğlu, "Innovation performance and competitive strategies in the Turkish manufacturing industry", The 8th International Research Conference on Quality, Innovation and Knowledge Management, New Delhi, India: Monash University, February 2007, 907-915
Bülent Çatay and Hakan Göl, "Logistics outsourcing and 3PL selection: A Case study in an automotive supply chain", 86th Annual Meeting of the Transportation Research Board, USA: Transportation Research Board, January 2007
Mehmet Can Arslan and Gürdal Ertek, "Visual mining of science citation data for benchmarking scientific and technological competitiveness of world countries", 2. International Conference on Technology and Economic Development, İzmir, Turkey: İzmir Ekonomi Üniversitesi 2007
Gürdal Ertek, Merve Ayşe Can, and Firdevs Ulus, "Benchmarking the Turkish apparel retail industry through data envelopment analysis (DEA) and data visualization ", EUROMA 2007 14th International Annual EurOMA Conference: Managing Operations in an Expanding, Ankara, Turkey: Bilkent University 2007
Ertunga Özelkan, Özkan Öztürk, and Erhan Budak, "Optimization of broaching design", G. Bayraksan, W. Lin, Y. Son, and R. Wysk (eds.), 2007 Industrial Engineering Research Conference, USA: - 2007
Tuğçe Gizem Martağan, Gürdal Ertek, Murat Yaşar, Ahmet Çakır, Nazım Okur, Gürdal Güllü, Özgür Sevim, Ş. İlker Birbil, and Ahmet Hacıoğlu, "Optimizing waste collection in an organized industrial region: a case study", 4th International Logistics and Supply Chain Management Congress, İzmir: Izmir University of Economics, December 2006
Kemal Kılıç and Gürdal Ertek, "Decision support for packing in warehouses", ISCIS 2006, 21th International Symposium, Springer, November 2006, 115-124
Firdevs Ulus, Özlem Köse, Gürdal Ertek, and Simay Şen, "Financial benchmarking of transportation companies in the New York Stock Exchange (NYSE) through data envolopment analaysis (DEA) and Visulation", 4th International Logistics and Supply Chain Congress, İzmir, Turkey, İzmir: İzmir University of Economics, November 2006
Bülent Çatay, "Ant colony optimization approach for the capacitated vehicle routing problem with simultaneous delivery and pick-up", 11th Meeting of the EURO Working Group on Transportation, "Advances in Traffic and Transportation Systems Analysis", Bari: Technical University of Bari, September 2006, 275-282
Dilek Çetindamar and Gündüz Ulusoy, "Innovation performance and partnerships", 2nd European Management of Technology Conference,, September 2006
Gündüz Ulusoy, Sunder Kekre, Elif B. Sarpca, and Nihat Altıntaş, "Value creation by Turkish enterprises", PICMET Conference, Portland: Portland State University, July 2006
Emre Özlü and Erhan Budak, "Analytical stability models for turning and boring operations", 2nd International Conference on High Speed Cutting,, June 2006
Seda Alp, Gürdal Ertek, and Ş. İlker Birbil, "Application of the cutting stock problem to a construction company: a case study", 5th International Symposium On Intelligent Manufacturing Systems, Sakarya: Sakarya Üniversitesi, May 2006
Ömer Gürarslan, Yiğit Hüseyin Güler, Hasan Şahin, Gürdal Ertek, Kutluk Özgüven, Cacina Şehmuz, and Alican Akkaş, "Demonstrating warehousing concepts through interactive animations", 5th International Symposium on Intelligent Manufacturing Systems, Sakarya, Turkey, Sakarya: Sakarya Üniversitesi, May 2006
Berat Mataracı and Gürdal Ertek, "Spreadsheet optimization of flow for WIP goods at a yarn and tire cord manufacturer:", 5th International Symposium on Intelligent Manufacturing Systems, Sakarya, Turkey,, May 2006, 642-651
Emre Özlü and Erhan Budak, "Analytical prediction of stability limit in turning operations", CIRP International Workshop on Modeling of Machining Operations,, May 2006, 99-106
Altuğ Pekin, Gamze Özkan, Onur Eski, Umut Karaarslan, Gürdal Ertek, and Kemal Kılıç, "Application of the analytic hierarchy process (AHP) for selection of forecasting software", International Symposium On Intelligent Manufacturing Systems- IMS 2006, Sakarya: Sakarya Üniversitesi, May 2006
Behlül Saka, Gürdal Ertek, and Can Hulusi Türkseven, "Development of an interactive simulation of steel cord manufacturing for industrial engeneering education", 5th International Symposium on Intelligent Manufacturing Systems, Sakarya, Turkey, Sakarya: Sakarya Üniversitesi, May 2006
L. Taner Tunç, Erhan Budak, and Erdinç Öztürk, "Optimization of 5-axis milling processes using process models", 9th CIRP International Workshop on Modeling of Machining Operations,, May 2006, 179-186
Emre Özlü and Erhan Budak, "Tornalama işlemlerinde süreç kararlılığının analitik olarak modellenmesi", TİMAK Kongresi,, April 2006
Erdem Öztürk and Erhan Budak, "5 eksen frezelemede kuvvet ve şekil hatalarının modellenmesi", TIMAK Conference, Balıkesir: Balıkesir Üniversitesi, April 2006
L. Taner Tunç and Erhan Budak, "5 eksen frezeleme süreçlerinin modelleme yoluyla benzetimi ve eniyilenmesi", TIMAK Conference, Balıkesir: Balıkesir Üniversitesi, April 2006
Firdevs Ulus, Özlem Köse, Gürdal Ertek, and Simay Şen, "Financial benchmarking of transportation companies in the New York Stock Exchange (NYSE) through data envelopment analysis (DEA) and visualization ", 4th International Logistics and Supply Chain Congress, İzmir,Turkey: İzmir Ekonomi Üniversitesi 2006
Aylin Aksu, Özgür Erçetin, Tonguç Ünlüyurt, Kerem Bülbül, and Kemal Kılıç, "Energy efficient and reliable routing with cooperative diversity in wireless Ad-Hoc networks", The 20th International Symposium on Computer and Information Sciences, Istanbul, Turkey: Imperial College Press, October 2005, 339-348
Erhun Ömer Kundakcıoğlu, Kerem Bülbül, Tonguç Ünlüyurt, Kemal Kılıç, and Özgür Erçetin, "Minimum power multicasting with delay bound constraints in Ad Hoc wireless networks", The 20th International Symposium on Computer and Information Sciences, Istanbul, Turkey: Imperial College Press, October 2005, 252-263
Erhan Budak and Erkin Tekeli, "Maximizing chatter free material removal rate in milling through optimal selection of axial and radial depth of cut pairs", 55th General Assembly of CIRP, Bern, Switzerland: CIRP, July 2005, 353-356
Kerem Bülbül, "Job shop scheduling with earliness, tardiness and intermediate inventory holding costs", MISTA Conference 2005, New York, NY, USA, New York: MISTA 2005, July 2005, 188-192
Ş. İlker Birbil, "Challenges for sustainable urban transportation in Turkey", Bülent Durmuşoğlu (ed.), 35th International Conference on Computers & Industrial Engineering, Istanbul, Turkey: -, June 2005
Gürdal Ertek, Burak Aksu, Ş. İlker Birbil, Cihan İkikat, and Can Yıldırmaz, "Application of local search methods for solving a quadratic assignment problem: A case study", Bülent Durmuşoğlu (ed.), International Conference on Computers and Industrial Engineering , Istanbul, Turkey: -, June 2005
Elif İlke Gökçe and Bülent Çatay, "A revised ant colony system for the vehicle routing problem with time windows", Bülent Durmuşoğlu (ed.), 35th International Conference on Computers & Industrial Engineering, Istanbul: İTÜ İşletme Fakültesi, June 2005, 813-818
Nursel Kavlak, Gündüz Ulusoy, Ş. İlker Birbil, and Funda Sivrikaya Şerifoğlu, "Client-contractor bargaining on net present value in the context of a project with limited resources", Bülent Durmuşoğlu (ed.), 35th International Conference on Computers and Industrial Engineering, Istanbul, Turkey: -, June 2005, 1109-1114
Erdem Öztürk and Erhan Budak, "Modeling of 5-axis forces", Proceedings of the 8th International Workshop on Modeling of Machining Operations, Chemnitz, Germany: -, May 2005, 319-326
Arif Volkan Vural, Bülent Çatay, and B. Ekşioğlu, "A dual GA approach to capacitated vehicle routing problem with simultaneous pick-up and deliveries", IIE Annual Conference 2005, -: - 2005
Kemal Kılıç, O. Uncu, and I. B. Turksen, "Different approaches of fuzzy structure identification in mining medical diagnosis rules", IEEE Conference on Cybernetics and Intelligent Systems, 2004, USA: IEEE, December 2004, 563-568
Gürdal Ertek, Can Kuruca, Cenk Aydın, Besim Ferit Erel, Harun Doğan, Mustafa Duman, Mete Öcal, and Zeynep Damla Ok, "Visual and analytical mining of sales transaction data for production planning and marketing", 4th International Symposium on Intelligent Manufacturing Systems,, September 2004
Erhan Budak, "High performance milling", Aerotrends 2004 Conference,, July 2004
Mehmet Kayhan and Erhan Budak, "Investigating effects of chatter vibrations on tool wear in turning", 4th CIRP International Seminar on Intelligent Computation in Manufacturing Engineering,, July 2004, 679-684
Utku Köktürk and Erhan Budak, "Optimization of broaching tool geometry", International Seminar on Intelligent Computation i, CIRP, July 2004, 393-398
Murat Kılıç, Gündüz Ulusoy, and Funda Sivrikaya Şerifoğlu, "Risk altında proje çizelgelemeye iki amaçlı genetik algoritma yaklaşımı", R. Erol, T. Dereli, and A. Baykasoğlu (eds.), Yöneylem Araştırması ve Endüstri Mühendisliği XXIV. Ulusal Kongresi ,, June 2004, 79-81
Emrah Çimren, Bülent Çatay, and Erhan Budak, "Development of a machine tool selection system using analytic hierarchy process ", 4th CIRP International Seminar on Intelligent Computation in Manufacturing Engineering (CIRP ICME '04), Paris, France: CIRP, May 2004, 193-198
Murat Kılıç, Gündüz Ulusoy, and Funda Sivrikaya Şerifoğlu, "A biobjective genetic algorithm approach to project scheduling under risk", A. Oulamara and M-C. Portmann (eds.), Ninth International Workshop on Project Management and Scheduling - PMS2004, Nancy, France: Ecole des Mines de Nancy, Nancy, France, April 2004, 58-61
Can Hulusi Türkseven and Gürdal Ertek, "Simulation modeling for quality and productivity in steel cord manufacturing", 2003 Winter Simulation Conference , USA: IEEE (Institute of Electrical and Electronics Engineers), December 2003, 1225-1229
Gündüz Ulusoy, "Competitive manufacturing strategies for the manufacturing industries in Turkey", EUROMA-POMS Meeting 2003, Milano, Italy: European Operation Management Association, June 2003, 313-322
Editörlüğü Yapılan Kitaplar / Özel Nüshalar
Bülent Çatay, Raymond Chiong, and Partick Siarry, Computational intelligence in production and logistics systems (International Journal of Production Economics: Special Section), Amsterdam, Netherlands: Elsevier, September 2013
Erhun Ömer Kundakcıoğlu, Gündüz Ulusoy, and Tonguç Ünlüyurt, Optimization Letters: Special Issue: 30th National Congress on Operations Research and Industrial Engineering, Turkey, Heidelberg, Germany: Springer, August 2012
Gündüz Ulusoy and Güvenç Şahin, Endüstri Mühendisliği Dergisi (YAEM özel sayısı), TMMOB Makina Mühendisleri Odası, March 2012