Emre Özlü | Mühendislik ve Doğa Bilimleri Fakültesi

http://myweb.sabanciuniv.edu/eozlu/

09/2004-06/2008 Sabancı Üniversitesi, Endüstri Mühendisliği Doktora Programı

10/2001-06/2003 İstanbul Teknik Üniversitesi, Fen Bilimleri Enstitüsü, Makina Mühendisliği İmalat Yüksek Lisans Programı

10/1997-07/2001 İstanbul Teknik Üniversitesi, Makina Mühendisliği (Makina Malzemesi ve İmalat AnabilimDalı)

Digital Manufacturing and Applications, Multi-dimensional chatter vibrations and stability in machining operations, particularly in turning, boring and 5-axis milling; analytical process modeling for turning, milling, and broaching operations; friction in metal cutting; broach tool design and optimization; high strain rate deformation of metals.

Barzegar Osgouei, Zahra and Özlü, Emre and Altan, Erhan and Budak, Erhan, "Heat modeling for third deformation zone", 9th International Congress on Machining (UTIS 2018), UTIS, November 2018

Çoskun, Sıla and Baytok, Esma and Özlü, Emre and Sert Alağaç, Melike and Akın, Cenk, "Experimental analysis of orange peel problem in turning of titanium alloys", 9th International Congress on Machining (UTIS 2018), UTIS, November 2018

Rahimzadeh Berenji, Kaveh and Özlü, Emre and Budak, Erhan, "An experimental study on surface errors in orthogonal turn-milling process", 9th International Congress on Machining (UTIS 2018), UTIS, November 2018

Barzegar Osgouei, Zahra and Budak, Erhan and Özlü, Emre, "Modeling of tool temperature in orthogonal cutting", 8th International Symposium on Machining, UTIS, November 2017

Bilgen, Samet and Özlü, Emre and Erberdi, Muharrem S. and Budak, Erhan, "An experimental study of CNC machine tool feed drive limits and cycle time prediction for a 3-axis milling operation", Kaftanoğlu, Bilgin and Budak, Erhan (eds.), 8th International Conference and Exhibition on Design and Production of Machines and DIES/MOLDS, Ankara: Atilim University, June 2015

Baytok, Esma and Özlü, Emre and Budak, Erhan, "Titanyum ve alaşımlarının yüksek performanslı işlenmesi (High performance machining of titanium and its alloys)", 5. Ulusal Talaşlı İmalat Sempozyumu (UTİS 2014), Bursa, Türkiye: Uludağ Üniversitesi, October 2014

Çakır, Esin and Karagüzel, Umut and Olgun, Utku and Özlü, Emre and Bakkal, Mustafa and Budak, Erhan, "Dik kesme durumunda kesme sıcaklığının analitik modellenmesi ve deneysel olarak doğrulanması (Modeling of temperature distribution in orthogonal cutting and experimental verfication)", 4. Ulusal Talaşlı İmalat Sempozyumu (UTİS 2013), Izmir, Turkey: Ege University 2013, 129-138

Özlü, Emre and Budak, Erhan, "Process modeling of orthogonal cutting with hone radiused tools ", 12th CIRP Conference on Modeling and Machining Operations, San Sebastian, Spain: CIRP (International Academy for Production Engineering) 2009

Özlü, Emre and Budak, Erhan, "Analytical stability models for turning and boring operations", 2nd International Conference on High Speed Cutting,, June 2006

Özlü, Emre and Budak, Erhan, "Analytical prediction of stability limit in turning operations", CIRP International Workshop on Modeling of Machining Operations,, May 2006, 99-106

Özlü, Emre and Budak, Erhan, "Tornalama işlemlerinde süreç kararlılığının analitik olarak modellenmesi", TİMAK Kongresi,, April 2006

Berenji K.R., Karagüzel U., Özlü E., Budak E., 2019, Effects of turn-milling conditions on chip formation and surface finish, CIRP Annals, In Press (https://doi.org/10.1016/j.cirp.2019.04.067).
Cakir, E., Ozlu, E., Bakkal, M., Budak E., 2018, Investigation of temperature distribution in orthogonal cutting through dual-zone contact model on the rake face, The International Journal of Advanced Manufacturing Technology, 96, 81-89.
Budak E., Ozlu E., Bakioglu H., Barzegar, Z., 2016, Thermo-mechanical Modeling of the Third Deformation Zone in Machining for Prediction of Cutting Forces, CIRP Annals Manufacturing Technology, 65/1, 121-124.
Ozlu E., Budak E., and Molinari A., 2010, Two-zone analytical contact model applied to orthogonal cutting, Machining Science and Technology: An International Journal, 14/3, 323-343.
Ozlu E., Budak E., and Molinari A., 2009, Analytical and experimental investigation of rake contact and friction behavior in metal cutting, International Journal of Machine Tools and Manufacture (49/11), 865-875.
Soldani, X., Moufki, A., Molinari, A. Budak E, Özlü E, 2008, High Speed Machining of AISI 1050 Steel: Modelling and Experimental, Int J Mater Form Suppl 1: 1439.
Ozlu, E., Budak E., 2008, Development of a Thermomechanical Cutting Process Model for Machining Process Simulations, Annals of the CIRP, (57), 97-100.
Ozlu, E., Budak, E., 2007, Comparison of One Dimensional Oriented Transfer Function Stability Model vs. Multi-Dimensional Stability Model in Turning Operations, International Journal of Machine Tools&Manufacture, (47), 1875-1883.
Ozlu, E., Budak, E., 2007, Analytical Modeling of Chatter Stability in Turning and Boring Operations: A Multi-Dimensional Approach, Annals of the CIRP, (56), 401-404.
Ozlu, E., Budak, E., 2007 Analytical Modeling of Chatter Stability in Turning and Boring Operations Part I: Model Development, Trans. ASME Journal of Manufacturing Science and Technology, (129), 733-739.
Ozlu, E., Budak, E., 2007, Analytical Modeling of Chatter Stability in Turning and Boring Operations Part II: Experimental Verification, Trans. ASME Journal of Manufacturing Science and Technology, (129), 726-732.
Ozlu, E., Zhe, J.,Chandra, S., Cheng J., Wu X., 2006, Feasibility Study of a Smart Motion Generator Utilizing Electromagnetic Microactuator Arrays, Smart Materials and Structures, (15), 1-10.

Fakülte Üyeleri

Kişisel Web

Eğitim

Araştırma Alanları

Yayınlar