| Mühendislik ve Doğa Bilimleri Fakültesi

Mehmet Yıldız Mühendislik ve Doğa Bilimleri Fakültesi Öğretim Üyesi (216) 483 9010 mehmetyildizsabanciunivedu

Personal Web

http://people.sabanciuniv.edu/~meyildiz/

Jobs

Öğretim Üyesi

Education

Lisans: Metalurji ve Malzeme Mühendisliği Bölümü, Yıldız Teknik Üniversitesi, İstanbul, Türkiye, 1996 Yüksek Lisans: Metalurji ve Malzeme Mühendisliği Bölümü, İstanbul Teknik Üniversitesi,İstanbul, Türkiye, 2000 Doktora: Makina Mühendisliği, Victoria Üniversitesi, BC, Kanada, 2005

Özbek, Yağız and Al-Nadhari, Abdulrahman Saeed Abdulqader and Eskizeybek, Volkan and Yıldız, Mehmet and Şaş Çaycı, Hatice Sinem (2025) "Influence of strand size and morphology on the mechanical performance of recycled CF/PEKK composites: harnessing waste for aerospace secondary load-bearing applications", Composites Part B: Engineering, Vol.296 (SCI)

Al-Nadhari, Abdulrahman Saeed Abdulqader and Ulus, Hasan and Topal, Serra and Yıldız, Mehmet (2025) "Analyzing stiffness variations in 3D woven composites: a multi-instrumental study on Glass/Kevlar hybridization effects under tensile and shear loads", Composites Part A: Applied Science and Manufacturing, Vol.191 (SCI)

Mehdipour Aghbolagh, Mostafa and Doğan, Semih and Al-Nadhari, Abdulrahman Saeed Abdulqader and Sorayani Bafqi, Mohammad Sajad and Beylergil, Bertan and Yıldız, Mehmet and Saner Okan, Burcu (2025) "Influence of functionalized h-BN particle interphase and interface regulation with structural design on the directional thermal conductivity and mechanical performance of carbon fiber/epoxy composites", Composites Part A: Applied Science and Manufacturing, Vol.190 (SCI)

Seyednourani, Mahsa and Akgün, Sercan and Ulus, Hasan and Yıldız, Mehmet and Şaş Çaycı, Hatice Sinem (2025) "Impact damage and low temperature effects on carbon fiber/epoxy joints: a comparative study of hybrid bolted/bonded and bolted configurations with cross-ply and angle-ply laminates", Composites Part A: Applied Science and Manufacturing, Vol.190 (SCI)

Yıldırım, Ceren and Ulus, Hasan and Şaş Çaycı, Hatice Sinem and Topal, Serra and Yıldız, Mehmet (2025) "Assessing the fracture and dynamic mechanical performance of CF/PEKK joints bonded with epoxy-based adhesive film for aerospace applications: impact of thermal and cycling hygrothermal conditions", Composites Part A: Applied Science and Manufacturing, Vol.190 (SCI)

Özbek, Yağız and Al-Nadhari, Abdulrahman Saeed Abdulqader and Elmas, Sinem and Eskizeybek, Volkan and Yıldız, Mehmet and Şaş Çaycı, Hatice Sinem (2025) "Feasibility and performance evaluation of randomly oriented strand recycled composite skins in sandwich structures: a green cost-effective solution for aerospace secondary load-bearing applications". Published Online First https://dx.doi.org/10.1002/pc.29689

Akgün, Sercan and Ali, Hafiz Qasim and Şenol, Cahit Orhun and Yıldız, Mehmet (2025) "Experimental and numerical analysis of damage progression in composite cylinders with cutouts under combined loading using structural health monitoring techniques", Composite Structures, Vol.354 (SCI)

Al-Nadhari, Abdulrahman Saeed Abdulqader and Yıldırım, Ceren and Topal, Serra and Emami Tabrizi, Isa and Yıldız, Mehmet (2025) "In-situ acoustic emission based technique for damage detection and identification and failure mode prediction in scarf repaired composite structures", Measurement: Journal of the International Measurement Confederation, Vol.242, No.Part C (SCI)

Yakın, Fetiye Esin and Şenol, Cahit Orhun and Birgün, Nihan and Ulus, Hasan and Yıldız, Mehmet and Şaş Çaycı, Hatice Sinem (2025) "Influence of stacking sequence and compaction force during the AFP process on mechanical performance and damage mechanisms elucidated by acoustic emission insights". Published Online First https://dx.doi.org/10.1177/14644207241309548

Özbek, Yağız and Yıldırım, Ceren and Yakın, Fetiye Esin and Topal, Serra and Yıldız, Mehmet and Şaş Çaycı, Hatice Sinem (2024) "Enhancing adhesive bonding and mechanical properties of composite sandwich panels through atmospheric plasma activation". Published Online First https://dx.doi.org/10.1002/pc.29290

Zarepour, Atefeh and Ülker, Zeynep and Khosravi, Arezoo and Coskun, Abdurrahman and Ertas, Yavuz Nuri and Yıldız, Mehmet and Zarrabi, Ali (2024) "Light-responsive liposome as a smart vehicle for the delivery of anticancer herbal medicine to skin". Published Online First https://dx.doi.org/10.1007/s42247-024-00907-7

Elmas, Sinem Gül and Ataç Teksin, Buse and Şenol, Cahit Orhun and Topal, Serra and Yıldız, Mehmet and Şaş Çaycı, Hatice Sinem (2024) "Annealing impact on mechanical performance and failure analysis assisted with acoustic inspection of carbon fiber reinforced poly-ether-ketone-ketone composites under flexural and compressive loads". Published Online First https://dx.doi.org/10.1002/pc.29199

Mehdipour Aghbolagh, Mostafa and Doğan, Semih and Hezarkhani, Marjan and Dericiler, Kuray and Arık, Muhammet Nasuh and Yıldırım, Cennet and Beylergil, Bertan and Yıldız, Mehmet and Saner Okan, Burcu (2024) "Enhancing directional thermal conductivity in hexagonal boron nitride reinforced epoxy composites through robust interfacial bonding". Published Online First https://dx.doi.org/10.1002/pc.29136

Ateşpare, Asu Ece and Behroozi Kohlan, Taha and Salamatgharamaleki, Saeed and Yıldız, Mehmet and Menceloğlu, Yusuf Z. and Ünal, Serkan and Dızman, Bekir (2024) "Poly(2-alkyl/aryl-2-oxazoline)-imidazole complexes as thermal latent curing agents for epoxy resins". Published Online First https://dx.doi.org/10.1021/acsomega.4c03904

Basaran, Mustafa and Turkmen, Halit Suleyman and Yıldız, Mehmet (2024) "Sensor-enhanced thick laminated composite beams: manufacturing, testing, and numerical analysis", Sensors, Vol.24, No.16 (SCI)

Al-Nadhari, Abdulrahman Saeed Abdulqader and Kheyabani, Aryan and Kefal, Adnan and Topal, Serra and Yıldız, Mehmet (2024) "Effective multiscale structural analysis of thick sandwich structures with 3D woven composite face sheets and a soft core based on coupled micromechanics and refined zigzag theory", Composite Structures, Vol.337 (SCI)

Barzegar Osgouei, Ali and Karimi, Sasan and Şaş Çaycı, Hatice Sinem and Yıldız, Mehmet (2024) "Enhancing interlaminar bonding quality estimation in laser-assisted fiber placement of CF/PEKK composites: a correction factor approach for improved prediction of intimate contact", Composites Part A: Applied Science and Manufacturing, Vol.181 (SCI)

Özyiğit, Samet and Mehdipour Aghbolagh, Mostafa and Al-Nadhari, Abdulrahman Saeed Abdulqader and Tabrizi, Arvin T. and Doğan, Semih and Dericiler, Kuray and Beylergil, Bertan and Yıldız, Mehmet and Saner Okan, Burcu (2024) "A comprehensive experimental study on the effects of hexagonal boron nitride particle size and loading ratio on thermal and mechanical performance in epoxy composites", Journal of Composite Materials, Vol.58, No.13 (SCI)

Karimi, Sasan and Yousefi Louyeh, Pouya and Barzegar Osgouei, Ali and Yıldız, Mehmet and Şaş Çaycı, Hatice Sinem (2024) "A study of post-processing for AFP-fabricated thermoplastic composites with void content and air permeability characterization", Journal of Reinforced Plastics and Composites, Vol.43, No.9-10, 490-503 (SCI)

Seçer, Ragıp Orkun and Nedjad, Syamak Hossein and Yıldız, Mehmet (2024) "Extending a phase field model of polycrystalline solidification for simulating grain evolution in metal additive manufacturing", Computational Materials Science, Vol.240 (SCI)

Yıldırım, Ceren and Ulus, Hasan and Beylergil, Bertan and Al-Nadhari, Abdulrahman Saeed Abdulqader and Topal, Serra and Yıldız, Mehmet (2024) "Tailoring adherend surfaces for enhanced bonding in CF/PEKK composites: comparative analysis of atmospheric plasma activation and conventional treatments", Composites Part A: Applied Science and Manufacturing, Vol.180 (SCI)

Abdali, Amirreza and Hossein Nedjad, Syamak and Hamed Zargari, Habib and Saboori, Abdollah and Yıldız, Mehmet (2024) "Predictive tools for the cooling rate-dependent microstructure evolution of AISI 316L stainless steel in additive manufacturing", Journal of Materials Research and Technology, Vol.29, 5530-5538 (SCI)

Durmuş Sayar, Ayşe and Tansan, Murat and Çinko Çoban, Tuğçe and Serttan, Dilay and Dızman, Bekir and Yıldız, Mehmet and Ünal, Serkan (2024) "Incorporation of graphene nanoplatelets into fiber-reinforced polymer composites in the presence of highly branched waterborne polyurethanes", Polymers, Vol.16, No.6 (SCI)

Kheyabani, Aryan and Ali, Hafiz Qasim and Kefal, Adnan and Yıldız, Mehmet (2024) "Coupling of isogeometric higher-order RZT and parametric HFGMC frameworks for multiscale modeling of sandwich laminates: theory and experimental validation", Aerospace Science and Technology, Vol.146 (SCI)

Zoghipour, Pouya and Kefal, Adnan and Yıldız, Mehmet (2024) "Structural analysis of sandwich plates with variable stiffness composite skins and functionally graded cores using refined zig-zag theory". Published Online First https://dx.doi.org/10.1080/15376494.2024.2323098

Isik, Murat and Emami Tabrizi, Isa and Khan, Raja Muhammad Awais and Yıldız, Mehmet and Aydoğan, Eda and Koç, Bahattin (2024) "The effect of additively and subtractively created center internal features on microstructure and mechanical performance of inconel-718 parts", Rapid Prototyping Journal, Vol.30, No.2, 287-304 (SCI)

Kömürcü, Emre and Kefal, Adnan and Abdollahzadeh, M. A. and Basoglu, M. F. and Kısa, Erdal and Yıldız, Mehmet (2024) "Towards composite suspension control arm: conceptual design, structural analysis, laminate optimization, manufacturing, and experimental testing", Composite Structures, Vol.327 (SCI)

Vakilha, M. and Saghatchi, Roozbeh and Alexiadis, A. and Yıldız, Mehmet and Shadloo, M. S. (2024) "A fully explicit incompressible smoothed particle hydrodynamics approach for modeling transient heat transfer and thermo-capillary flows", Computers and Fluids, Vol.269 (SCI)

Al-Nadhari, Abdulrahman Saeed Abdulqader and Şenol, Halil and Topal, Serra and Ulus, Hasan and Yıldız, Mehmet (2023) "The effect of multiscale Kevlar/Glass hybridization on the mechanical properties and the damage evolution of 3D orthogonal woven composites under flexural and impact loadings", Composites Part A: Applied Science and Manufacturing, Vol.175 (SCI)

Behroozi Kohlan, Taha and Ateşpare, Asu Ece and Yıldız, Mehmet and Menceloğlu, Yusuf Z. and Ünal, Serkan and Dızman, Bekir (2023) "Amphiphilic polyoxazoline copolymer-imidazole complexes as tailorable thermal latent curing agents for one-component epoxy resins", ACS Omega, Vol.8, No.49, 47173-47186 (SCI)

Gul, Saher and Arican, Selin and Cansever, Murat and Yıldız, Mehmet and Saner Okan, Burcu (2023) "Dimension effect on thermal conductivity of hexagonal boron nitride/titanium dioxide reinforced hybrid PEEK composites developed with a scalable compounding approach", Polymer Composites, Vol.44, No.12, 8669-8682 (SCI)

Işık, Murat and Yıldız, Mehmet and Seçer, Ragıp Orkun and Sen, Ceren and Bilgin, Guney Mert and Orhangul, Akin and Akbulut, Guray and Javidrad, Hamidreza and Koç, Bahattin (2023) "Fabrication of electron beam melted titanium aluminide: the effects of machining parameters and heat treatment on surface roughness and hardness", Metals, Vol.13, No.12 (SCI)

Yıldırım, Ceren and Tabrizi, Isa Emami and Al-Nadhari, Abdulrahman Saeed Abdulqader and Topal, Serra and Beylergil, Bertan and Yıldız, Mehmet (2023) "Characterizing damage evolution of CF/PEKK composites under tensile loading through multi-instrument structural health monitoring techniques", Composites Part A: Applied Science and Manufacturing, Vol.175 (SCI)

Ali, Hafiz Qasim and Wagner, H. N. R. and Akalın, C. and Tabrizi, I. E. and Hühne, C. and Yıldız, Mehmet (2023) "Buckling and fracture analysis of thick and long composite cylinders with cutouts under axial Compression: an experimental and numerical campaign", Composite Structures, Vol.324 (SCI)

Ranjbar Aghjehkohal, Amin and Taghizadeh Tabrizi, Arvin and Yıldız, Mehmet (2023) "Electrochemical hydrogen storage of synthesized heterostructure of hexagonal boron nitride-carbon nano tube", Journal of Alloys and Compounds, Vol.962 (SCI)

Dericiler, Kuray and Hezarkhani, Marjan and Emami Tabrizi, Isa and Doğan, Semih and Berktaş, İlayda and Erdem, Emre and Advani, Suresh G. and Yıldız, Mehmet and Şaş Çaycı, Hatice Sinem and Saner Okan, Burcu (2023) "Effect of interleaved electrolyte forms on macro-scaled structural hybrid supercapacitors with asymmetric configurations of graphene-coated carbon fabric electrodes", Applied Composite Materials, Vol.30, No.5, 1435-1451 (SCI)

Seyednourani, Mahsa and Akgün, Sercan and Ulus, Hasan and Yıldız, Mehmet and Şaş Çaycı, Hatice Sinem (2023) "Experimental investigation on compression-after-impact (CAI) response of aerospace grade thermoset composites under low-temperature conditions assisted with acoustic emission monitoring", Composite Structures, Vol.321 (SCI)

Barzegar Osgouei, Ali and Karimi, Sasan and Sukur, Emine Feyza and Şaş Çaycı, Hatice Sinem and Yıldız, Mehmet (2023) "Effect of fiber orientation on temperature history during laser-assisted thermoplastic fiber placement", Journal of Reinforced Plastics and Composites, Vol.42, No.17-18, 953-968 (SCI)

Yıldırım, Ceren and Ulus, Hasan and Beylergil, Bertan and Al-Nadhari, Abdulrahman Saeed Abdulqader and Topal, Serra and Yıldız, Mehmet (2023) "Effect of atmospheric plasma treatment on Mode-I and Mode-II fracture toughness properties of adhesively bonded carbon fiber/PEKK composite joints", Engineering Fracture Mechanics, Vol.289 (SCI)

Ali, Hafiz Qasim and Aydin, Mehmet Serhat and Awais Khan, Raja Muhammad and Yıldız, Mehmet (2023) "The role of "thickness effect" on the damage progression and crack growth inside the plain-woven carbon fiber composites", Composites Science and Technology, Vol.241 (SCI)

Şükür, Emine Feyza and Elmas, Sinem Gül and Eskizeybek, Volkan and Şaş Çaycı, Hatice Sinem and Yıldız, Mehmet (2023) "An experimental implication of long-term hot-wet-aged carbon fiber/polyether ketone ketone composites: the impact of automated fiber placement process parameters and process-induced defects", Journal of Applied Polymer Science, Vol.140, No.29 (SCI)

Ali, Hafiz Qasim and Kheyabani, Aryan and Akalın, Cagdas and Kefal, Adnan and Yıldız, Mehmet (2023) "Numerical and experimental methodologies to investigate the damage progression inside the axisymmetric composite cylinders with cutouts under torsion", Composite Structures, Vol.315 (SCI)

Akgün, Sercan and Şenol, Cahit Orhun and Kılıç, Göktuğ and Tabrizi, Isa Emami and Yıldız, Mehmet (2023) "A novel damage evaluation of CFRPs under mode-I loading by using multi-instrument structural health monitoring methods", Engineering Fracture Mechanics, Vol.286 (SCI)

Khan, Raja Muhammad Awais and Shafighfard, Torkan and Ali, Hafiz Qasim and Mieloszyk, Magdalena and Yıldız, Mehmet (2023) "Strength prediction and experimental damage investigations of plain woven CFRPs with interacting holes using multi-instrument measurements", Polymer Composites, Vol.44, No.6, 3594-3609 (SCI)

Beylergil, Bertan and Al-Nadhari, Abdulrahman Saeed Abdulqader and Yıldız, Mehmet (2023) "Optimization of Charpy-impact strength of 3D-printed carbon fiber/polyamide composites by Taguchi method", Polymer Composites, Vol.44, No.5, 2846-2859 (SCI)

Yılmaz, Çağatay and Ali, Hafiz Qasim and Yıldız, Mehmet (2023) "Monitoring and verification of micro-strain generated inside the laminate subjected to thermal loading through fiber bragg grating sensors and classical laminate theory", Polymer Composites, Vol.44, No.5, 2956-2965 (SCI)

Ali, Hafiz Qasim and Khan, Raja M. A. and Tabrizi, Isa E. and Yıldız, Mehmet (2023) "An experimental multi-instrumental approach to understand the size effect on the damage propagation of plain-woven CFRP composites under shear loading", Journal of Composite Materials, Vol.57, No.5, 955-966 (SCI)

Topal, Serra and Al-Nadhari, Abdulrahman Saeed Abdulqader and Yıldırım, Ceren and Beylergil, Bertan and Kan, Cihan and Ünal, Serkan and Yıldız, Mehmet (2023) "Multiscale nano-integration in the scarf-bonded patches for enhancing the performance of the repaired secondary load-bearing aircraft composite structures", Carbon, Vol.204, 112-125 (SCI)

Zoghipour, Pouya and Hasim, K. A. and Kefal, Adnan and Yıldız, Mehmet (2023) "Implementation of shear-locking-free triangular refined zigzag element for structural analysis of multilayered plates with curvilinear fibers", Composite Structures, Vol.305 (SCI)

Gul, Saher and Arican, Selin and Cansever, Murat and Beylergil, Bertan and Yıldız, Mehmet and Saner Okan, Burcu (2023) "Design of highly thermally conductive hexagonal boron nitride-reinforced PEEK composites with tailored heat conduction through-plane and rheological behaviors by a scalable extrusion", ACS Applied Polymer Materials, Vol.5, No.1, 329-341 (SCI)

Nedjad, Syamak Hossein and Yıldız, Mehmet and Saboori, Abdollah (2023) "Solidification behaviour of austenitic stainless steels during welding and directed energy deposition", Science and Technology of Welding and Joining, Vol.28, No.1, 1-17 (SCI)

Saghatchi, Roozbeh and Kolukısa, Deniz Can and Yıldız, Mehmet (2023) "Development of smoothed particle hydrodynamics method for modeling active nematics", International Journal for Numerical Methods in Engineering, Vol.124, No.1, 159-182 (SCI)

Saghatchi, Roozbeh and Yıldız, Mehmet (2023) "Vibration induced by active nematics", Journal of Fluid Mechanics, Vol.954 (SCI)

Sharani, Baidaa and Haghighi Poudeh, Leila and Elmas, Sinem and Şaş Çaycı, Hatice Sinem and Yıldız, Mehmet (2023) "Aspects of halloysite nanotubes integration in epoxy nanocomposites: curing kinetics and deformation mechanism", Polymer Composites, Vol.44, No.1, 574-591 (SCI)

Behroozi Kohlan, Taha and Ateşpare, Asu Ece and Yıldız, Mehmet and Menceloğlu, Yusuf Z. and Ünal, Serkan and Dızman, Bekir (2022) "Synthesis and structure-property relationship of amphiphilic poly(2-ethyl- co-2-(alkyl/aryl)-2-oxazoline) copolymers", ACS Omega, Vol.7, No.44, 40067-40077 (SCI)

Kendibilir, Abdullah and Kefal, Adnan and Sohouli, A. and Yıldız, Mehmet and Koç, Bahattin and Suleman, A. (2022) "Peridynamics topology optimization of three-dimensional structures with surface cracks for additive manufacturing", Computer Methods in Applied Mechanics and Engineering, Vol.401, No.Part B (SCI)

Ramezanzadeh, Shayan and Özbulut, Murat and Yıldız, Mehmet (2022) "A numerical investigation of the energy efficiency enhancement of oscillating water column wave energy converter systems", Energies, Vol.15, No.21 (SCI)

Şükür, Emine Feyza and Elmas, Sinem and Seyednourani, Mahsa and Eskizeybek, Volkan and Yıldız, Mehmet and Şaş Çaycı, Hatice Sinem (2022) "Effects of meso- and micro-scale defects on hygrothermal aging behavior of glass fiber reinforced composites", Polymer Composites, Vol.43, No.11, 8396-8408 (SCI)

Abdollahzadeh, Mohammadamin and Ali, Hafiz Qasim and Yıldız, Mehmet and Kefal, Adnan (2022) "Experimental and numerical investigation on large deformation reconstruction of thin laminated composite structures using inverse finite element method", Thin-Walled Structures, Vol.178 (SCI)

Şükür, Emine Feyza and Elmas, Sinem and Seyednourani, Mahsa and Eskizeybek, Volkan and Yıldız, Mehmet and Şaş Çaycı, Hatice Sinem (2022) "A rational study on the hydrothermal aging of AFP manufactured CF/polyetherketoneketone composites with in situ consolidation supported by acoustic emission inspection", Journal of Applied Polymer Science, Vol.139, No.29 (SCI)

Ali, Hafiz Qasim and Yilmaz, Çağatay and Yıldız, Mehmet (2022) "The effect of different tabbing methods on the damage progression and failure of carbon fiber reinforced composite material under tensile loading", Polymer Testing, Vol.111 (SCI)

Saghatchi, Roozbeh and Yıldız, Mehmet and Doostmohammadi, Amin (2022) "Nematic order condensation and topological defects in inertial active nematics", Physical Review E, Vol.106, No.1 (SCI)

Şahin, Zeynep Munteha and Behroozi Kohlan, Taha and Ateşpare, Asu Ece and Yıldız, Mehmet and Ünal, Serkan and Dızman, Bekir (2022) "Polyoxazoline-modified graphene oxides with improved water and epoxy resin dispersibility and stability towards composite applications", Journal of Applied Polymer Science, Vol.139, No.25 (SCI)

Celep, M. and Hadjadj, A. and Shadloo, M. S. and Sharma, S. and Yıldız, Mehmet and Kloker, M. J. (2022) "Effect of streak employing control of oblique-breakdown in a supersonic boundary layer with weak wall heating/cooling", Physical Review Fluids, Vol.7, No.5 (SCI)

Emami Tabrizi, Isa and Kefal, Adnan and Seyyed Monfared Zanjani, Jamal and Yıldız, Mehmet (2022) "Damage growth and failure detection in hybrid fiber composites using experimental in-situ optical strain measurements and smoothing element analysis", International Journal of Damage Mechanics, Vol.31, No.4, 479-507 (SCI)

Kefal, Adnan and Diyaroğlu, Çağan and Yıldız, Mehmet and Oterkus, Erkan (2022) "Coupling of peridynamics and inverse finite element method for shape sensing and crack propagation monitoring of plate structures", Computer Methods in Applied Mechanics and Engineering, Vol.391 (SCI)

Ozbulut, M. and Olmez, O. and Kolukısa, Deniz Can and Deliktas-Ozdemir, E. and Goren, O. and Yıldız, Mehmet (2022) "An investigation into the nonlinear effects in the roll motion of 2-D bodies by SPH method", Ocean Engineering, Vol.248 (SCI)

Rahimi, Mohammad Naqib and Kolukısa, Deniz Can and Yıldız, Mehmet and Ozbulut, Murat and Kefal, Adnan (2022) "A generalized hybrid smoothed particle hydrodynamics-peridynamics algorithm with a novel Lagrangian mapping for solution and failure analysis of fluid-structure interaction problems", Computer Methods in Applied Mechanics and Engineering, Vol.389 (SCI)

Arıkan, Muhammed Hasan and Eroğlu, Fatih and Eskizeybek, Volkan and Şükür, Emine Feyza and Yıldız, Mehmet and Şaş Çaycı, Hatice Sinem (2022) "A systematic characterization approach for vacuum bag only prepregs towards an accurate process design", Materials, Vol.15, No.2 (SCI)

Emami Tabrizi, Isa and Öz, Fatih Ertuğrul and Seyyed Monfared Zanjani, Jamal and Mandal, Sefa Kemal and Yıldız, Mehmet (2022) "Failure sequence determination in sandwich structures using concurrent acoustic emission monitoring and postmortem thermography", Mechanics of Materials, Vol.164 (SCI)

Işık, Murat and Kısa, Erdal and Koç, Bahattin and Yıldız, Mehmet and Pehlivanoğulları, Barış and Orhangül, Akın and Akbulut, Güray (2021) "Topology optimization and manufacturing of engine bracket using electron beam melting", Journal of Additive Manufacturing Technologies, Vol.1, No.3 (NA)

Abdollahzadeh, Mohammadamin and Tabrizi, Isa Emami and Kefal, Adnan and Yıldız, Mehmet (2021) "A combined experimental/numerical study on deformation sensing of sandwich structures through inverse analysis of pre-extrapolated strain measurements", Measurement: Journal of the International Measurement Confederation, Vol.185 (SCI)

De Sá Rodrigues, Francisco and Marques, Ricardo and Emami Tabrizi, Isa and Kefal, Adnan and Ali, Hafiz Qasim and Yıldız, Mehmet and Suleman, Afzal (2021) "A new methodology for thermoelastic model identification in composite materials using digital image correlation", Optics and Lasers in Engineering, Vol.146 (SCI)

Beylergil, Bertan and Emami Tabrizi, Isa and Zanjani, Jamal S.M. and Saeidiharzand, Shaghayegh and Haghighi Poudeh, Leila and Yıldız, Mehmet (2021) "Experimental failure analysis and mechanical performance evaluation of fiber-metal sandwich laminates interleaved with polyamide-6,6 interlayers through the combined usage of acoustic emission, thermography and microscopy techniques", Journal of Sandwich Structures and Materials, Vol.23, No.7, 3044-3080 (SCI)

Saghatchi, Roozbeh and Özbulut, Murat and Yıldız, Mehmet (2021) "Dynamics of double emulsion interfaces under the combined effects of electric field and shear flow", Computational Mechanics, Vol.68, No.4, 775-793 (SCI)

Seyednourani, Mahsa and Yıldız, Mehmet and Şaş Çaycı, Hatice Sinem (2021) "A two-stage optimization methodology for gate and vent locations and distribution media layout for liquid composite molding process", Composites Part A: Applied Science and Manufacturing, Vol.149 (SCI)

Emami Tabrizi, Isa and Sharani, Baidaa and Seyyed Monfared Zanjani, Jamal and Yıldız, Mehmet (2021) "Using digital image correlation for in situ strain and damage monitoring in hybrid fiber laminates under in-plane shear loading", Polymer Composites, Vol.42, No.8, 4029-4042 (SCI)

Khan, Raja Muhammad Awais and Saeidiharzand, Shaghayegh and Emami Tabrizi, Isa and Ali, Hafiz Qasim and Yıldız, Mehmet (2021) "A novel hybrid damage monitoring approach to understand the correlation between size effect and failure behavior of twill CFRP laminates", Composite Structures, Vol.270 (SCI)

Kefal, Adnan and Emami Tabrizi, Isa and Yıldız, Mehmet and Tessler, Alexander (2021) "A smoothed iFEM approach for efficient shape-sensing applications: numerical and experimental validation on composite structures", Mechanical Systems and Signal Processing, Vol.152 (SCI)

Rahimi, Mohammad Naqib and Kefal, Adnan and Yıldız, Mehmet (2021) "An improved ordinary-state based peridynamic formulation for modeling FGMs with sharp interface transitions", International Journal of Mechanical Sciences, Vol.197 (SCI)

Kolukısa, Deniz Can and Özbulut, Murat and Yıldız, Mehmet (2021) "The effect of iterative procedures on the robustness and fidelity of augmented lagrangian SPH", Symmetry, Vol.13, No.3 (SCI)

Massarwa, Eyass and Emami Tabrizi, Isa and Yıldız, Mehmet (2021) "Mechanical behavior and failure of glass/carbon fiber hybrid composites: multiscale computational predictions validated by experiments", Composite Structures, Vol.260 (SCI)

Seyyed Monfared Zanjani, Jamal and Yousefi Louyeh, Pouya and Emami Tabrizi, Isa and Al-Nadhari, Abdulrahman Saeed Abdulqader and Yıldız, Mehmet (2021) "Thermo-responsive and shape-morphing CF/GF composite skin: full-field experimental measurement, theoretical prediction, and finite element analysis", Thin-Walled Structures, Vol.160 (SCI)

Habibian, Anahita and Sohouli, Abdolrasoul and Kefal, Adnan and Nadler, Ben and Yıldız, Mehmet and Suleman, Afzal (2021) "Multi-material topology optimization of structures with discontinuities using peridynamics", Composite Structures, Vol.258 (SCI)

Kefal, Adnan and Emami Tabrizi, Isa and Tansan, Murat and Kısa, Erdal and Yıldız, Mehmet (2021) "An experimental implementation of inverse finite element method for real-time shape and strain sensing of composite and sandwich structures", Composite Structures, Vol.258 (SCI)

Tofighi, N. and Feng, J. J. and Yıldız, Mehmet and Suleman, A. (2021) "Long term sedimentation of an elliptic disc subject to an electrostatic field using smoothed particle hydrodynamics method", International Journal of Multiphase Flow, Vol.135 (SCI)

Alexiadis, Alessio and Albano, Andrea and Rahmat, Amin and Yıldız, Mehmet and Kefal, Adnan and Özbulut, Murat and Bakırcı, Nadi and Garzon Alvarado, Diego Alexander and Duque-Daza, Carlos Alberto and Eslava-Schmalbach, Javier Hernando (2021) "Simulation of pandemics in real cities: enhanced and accurate digital laboratories", Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, Vol.477, No.2245 (SCI)

Almasi, F. and Shadloo, M. S. and Hadjadj, A. and Özbulut, M. and Tofighi, Nima and Yıldız, Mehmet (2021) "Numerical simulations of multi-phase electro-hydrodynamics flows using a simple incompressible smoothed particle hydrodynamics method", Computers and Mathematics with Applications (SI), Vol.81, 772-785 (SCI)

Haghighi Poudeh, Leila and Berktaş, İlayda and Ali, Hafiz Qasim and Saner Okan, Burcu and Yıldız, Mehmet (2020) "Toward next-generation carbon-based materials derived from waste and biomass for high-performance energy applications", Energy Technology, Vol.8, No.12 (SCI)

Saghatchi, Roozbeh and Rahmat, Amin and Yıldız, Mehmet (2020) "Electrohydrodynamics of a droplet in a highly confined domain: a numerical study", Physics of Fluids, Vol.32, No.12 (SCI)

Sohouli, Abdol Rasoul and Kefal, Adnan and Abdelhamid, Ahmed and Yıldız, Mehmet and Suleman, Afzal (2020) "Continuous density-based topology optimization of cracked structures using peridynamics", Structural and Multidisciplinary Optimization, Vol.62, No.5, 2375-2389 (SCI)

Khan, Raja Muhammad Awais and Emami Tabrizi, Isa and Ali, Hafiz Qasim and Demir, Eralp and Yıldız, Mehmet (2020) "Investigation on interlaminar delamination tendency of multidirectional carbon fiber composites", Polymer Testing, Vol.90 (SCI)

Kolukısa, Deniz Can and Özbulut, Murat and Peşman, Emre and Yıldız, Mehmet (2020) "Development of computationally efficient augmented Lagrangian SPH for incompressible flows and its quantitative comparison with WCSPH simulating flow past a circular cylinder", International Journal for Numerical Methods in Engineering, Vol.121, No.18, 4187-4207 (SCI)

Rahimi, Mohammad Naqib and Kefal, Adnan and Yıldız, Mehmet and Öterkuş, Erkan (2020) "An ordinary state-based peridynamic model for toughness enhancement of brittle materials through drilling stop-holes", International Journal of Mechanical Sciences, Vol.182 (SCI)

Sharani, Baidaa and Emami Tabrizi, Isa and Seyyed Monfared Zanjani, Jamal and Rahimi, Mohammad Naqib and Haghighi Poudeh, Leila and Kefal, Adnan and Yıldız, Mehmet (2020) "Damage mechanisms in CFRP/HNT laminates under flexural and in-plane shear loadings using experimental and numerical methods", Composites Part A: Applied Science and Manufacturing, Vol.136 (SCI)

Abdollahzadeh, Mohammadamin and Kefal, Adnan and Yıldız, Mehmet (2020) "A comparative and review study on shape and stress sensing of flat/curved shell geometries using C0-continuous family of iFEM elements", Sensors, Vol.20, No.14 (SCI)

Bilal, Diyar Khalis and Ünel, Mustafa and Yıldız, Mehmet and Koç, Bahattin (2020) "Realtime localization and estimation of loads on aircraft wings from depth images", Sensors, Vol.20, No.12 (SCI)

Özbulut, Murat and Ramezanzadeh, Shayan and Yıldız, Mehmet and Gören, Ömer (2020) "Modelling of wave generation in a numerical tank by SPH method", Journal of Ocean Engineering and Marine Energy, Vol.6, No.2, 121-136 (ESCI)

Yılmaz, Çağatay and Topal, Serra and Ali, Hafiz Qasim and Tabrizi, Isa Emami and Al-Nadhari, Abdulrahman Saeed Abdulqader and Suleman, Afzal and Yıldız, Mehmet (2020) "Non-destructive determination of the stiffness matrix of a laminated composite structure with lamb wave", Composite Structures, Vol.237 (SCI)

Afghah, Seyedeh Ferdows and Ullah, Mohib and Zanjani, Jamal Seyyed Monfared and Süt, Pınar Akkuş and Şen, Özlem and Emanet, Melis and Saner Okan, Burcu and Çulha, Mustafa and Menceloğlu, Yusuf Z. and Yıldız, Mehmet and Koç, Bahattin (2020) "3D printing of silver-doped polycaprolactone-poly(propylene succinate) composite scaffolds for skin tissue engineering", Biomedical Materials, Vol.15, No.3 (SCI)

Demircan, Özgür and Yılmaz, Çağatay and Kocaman, Esat Selim and Yıldız, Mehmet (2020) "An experimental study on tensile and bending properties of biaxial warp knitted textile composites", Advanced Composite Materials, Vol.29, No.1, 73-88 (SCI)

Ali, Hafiz Qasim and Emami Tabrizi, Isa and Khan, Raja Muhammad Awais and Tufani, Ali and Yıldız, Mehmet (2019) "Microscopic analysis of failure in woven carbon fabric laminates coupled with digital image correlation and acoustic emission", Composite Structures, Vol.230 (SCI)

Emami Tabrizi, Isa and Khan, Raja Muhammad Awais and Massarwa, Eyass and Seyyed Monfared Zanjani, Jamal and Ali, Hafiz Qasim and Demir, Eralp and Yıldız, Mehmet (2019) "Determining tab material for tensile test of CFRP laminates with combined usage of digital image correlation and acoustic emission techniques", Composites Part A: Applied Science and Manufacturing, Vol.127 (SCI)

Kefal, Adnan and Sohouli, Abdolrasoul and Öterkuş, Erkan and Yıldız, Mehmet and Suleman, Afzal (2019) "Topology optimization of cracked structures using peridynamics", Continuum Mechanics and Thermodynamics (SI), Vol.31, No.6, 1645-1672 (SCI)

Tofighi, Nima and Özbulut, Murat and Suleman, A. and Feng, J. J. and Yıldız, Mehmet (2019) "Dielectrophoretic interaction of circular particles in a uniform electric field", European Journal of Mechanics - B/Fluids, Vol.78, 194-202 (SCI)

Ali, Hafiz Qasim and Emami Tabrizi, Isa and Khan, Raja Muhammad Awais and Seyyed Monfared Zanjani, Jamal and Yılmaz, Çağatay and Haghighi Poudeh, Leila and Yıldız, Mehmet (2019) "Experimental study on dynamic behavior of woven carbon fabric laminates using in-house piezoelectric sensors", Smart Materials and Structures, Vol.28, No.10 (SCI)

Shafighfard, Torkan and Demir, Eralp and Yıldız, Mehmet (2019) "Design of fiber-reinforced variable-stiffness composites for different open-hole geometries with fiber continuity and curvature constraints", Composite Structures, Vol.226 (SCI)

Emami Tabrizi, Isa and Kefal, Adnan and Seyyed Monfared Zanjani, Jamal and Akalın, Çağdaş and Yıldız, Mehmet (2019) "Experimental and numerical investigation on fracture behavior of glass/carbon fiber hybrid composites using acoustic emission method and refined zigzag theory", Composite Structures, Vol.223 (SCI)

Haghighi Poudeh, Leila and Letofsky-Papst, Ilse and Cebeci, Fevzi Çakmak and Menceloğlu, Yusuf Z. and Yıldız, Mehmet and Saner Okan, Burcu (2019) "Facile synthesis of single- and multi-layer graphene/Mn3O4 integrated 3D urchin-shaped hybrid composite electrodes by core-shell electrospinning", ChemNanoMat, Vol.5, No.6, 792-801 (SCI)

Kefal, Adnan and Haşim, Kazım Ahmet and Yıldız, Mehmet (2019) "A novel isogeometric beam element based on mixed form of refined zigzag theory for thick sandwich and multilayered composite beams", Composites Part B: Engineering, Vol.167, 100-121 (SCI)

Demir, Eralp and Yousefi Louyeh, Pouya and Yıldız, Mehmet (2019) "Design of variable stiffness composite structures using lamination parameters with fiber steering constraint", Composites Part B: Engineering, Vol.165, 733-746 (SCI)

Fatehi, R. and Rahmat, Amin and Tofighi, N. and Yıldız, Mehmet and Shadloo, M. S. (2019) "Density-based smoothed particle hydrodynamics methods for incompressible flows", Computers and Fluids, Vol.185, 22-33 (SCI)

Marques, Ricardo and Ünel, Mustafa and Yıldız, Mehmet and Suleman, Afzal (2019) "Remaining useful life prediction of laminated composite materials using thermoelastic stress analysis", Composite Structures, Vol.210, 381-390 (SCI)

Sohouli, A. and Yıldız, Mehmet and Suleman, Afzal (2018) "Cost analysis of variable stiffness composite structures with application to a wind turbine blade", Composite Structures, Vol.203, 681-695 (SCI)

Rahmat, Amin and Tofighi, Nima and Yıldız, Mehmet (2018) "A numerical study of Rayleigh-Taylor instability for various Atwood numbers using ISPH method", Progress in Computational Fluid Dynamics, Vol.18, No.5, 267-276 (SCI)

Seyyed Monfared Zanjani, Jamal and Al-Nadhari, Abdulrahman Saeed Abdulqader and Yıldız, Mehmet (2018) "Manufacturing of electroactive morphing carbon fiber/glass fiber/epoxy composite: process and structural monitoring by FBG sensors", Thin-Walled Structures, Vol.130, 458-466 (SCI)

Yılmaz, Çağatay and Yıldız, Mehmet and Menceloğlu, Yusuf Z. (2018) "Semi-intrinsic self-healing performance of liquid-cored microcapsules in epoxy matrix", Advances in Polymer Technology, Vol.37, No.5, 1435-1443 (SCI)

Rahmat, Amin and Yıldız, Mehmet (2018) "A multiphase ISPH method for simulation of droplet coalescence and electro-coalescence", International Journal of Multiphase Flow, Vol.105, 32-44 (SCI)

Dayan, Cem Balda and Afghah, Seyedeh Ferdows and Saner Okan, Burcu and Yıldız, Mehmet and Menceloğlu, Yusuf Z. and Çulha, Mustafa and Koç, Bahattin (2018) "Modeling 3D melt electrospinning writing by response surface methodology", Materials & Design, Vol.148, 87-95 (SCI)

Haghighi Poudeh, Leila and Çakıroğlu, Dilek and Cebeci, Fevzi Çakmak and Yıldız, Mehmet and Menceloğlu, Yusuf Z. and Saner Okan, Burcu (2018) "Design of Pt-supported 1D and 3D multilayer graphene-based structural composite electrodes with controlled morphology by core-shell electrospinning/electrospraying", ACS Omega, Vol.3, No.6, 6400-6410 (SCI)

Kocaman, Esat Selim and Yılmaz, Çağatay and Deniz, Ataman and Yıldız, Mehmet (2018) "The performance of embedded fiber Bragg grating sensors for monitoring failure modes of foam cored sandwich structures under flexural loads", Journal of Sandwich Structures and Materials, Vol.20, No.5, 553-577 (SCI)

Ozbulut, M. and Tofighi, N. and Goren, O. and Yıldız, Mehmet (2018) "Investigation of wave characteristics in oscillatory motion of partially filled rectangular tanks", Journal of Fluids Engineering, Transactions of the ASME, Vol.140, No.4 (SCI)

Shojaeian, Mostafa and Nedaei, Masoumeh and Yıldız, Mehmet and Koşar, Ali (2018) "Numerical heat transfer and entropy analysis on liquid slip flows through parallel-plate microchannels", Journal of Thermal Science and Engineering Applications, Vol.10, No.2 (SCI)

Seyyed Monfared Zanjani, Jamal and Saner Okan, Burcu and Pappas, Panagiotis-Nektarios and Galiotis, Costas and Menceloğlu, Yusuf Z. and Yıldız, Mehmet (2018) "Tailoring viscoelastic response, self-heating and deicing properties of carbon-fiber reinforced epoxy composites by graphene modification", Composites Part A: Applied Science and Manufacturing, Vol.106, 1-10 (SCI)

Sohouli, A. and Yıldız, Mehmet and Suleman, A. (2018) "Efficient strategies for reliability-based design optimization of variable stiffness composite structures", Structural and Multidisciplinary Optimization, Vol.57, No.2, 689-704 (SCI)

Yılmaz, Çağatay and Akalın, Çağdaş and Günal, İbrahim and Çelik, Hakan and Büyük, Murat and Suleman, Afzal and Yıldız, Mehmet (2018) "A hybrid damage assessment for E-and S-glass reinforced laminated composite structures under in-plane shear loading", Composite Structures, Vol.186, 347-354 (SCI)

Kefal, Adnan and Mayang, Jimmy Bunga and Öterkuş, Erkan and Yıldız, Mehmet (2018) "Three dimensional shape and stress monitoring of bulk carriers based on iFEM methodology", Ocean Engineering, Vol.147, 256-267 (SCI)

Kefal, Adnan and Yıldız, Mehmet (2017) "Modeling of sensor placement strategy for shape sensing and structural health monitoring of a wing-shaped sandwich panel using inverse finite element method", Sensors, Vol.17, No.12 (SCI)

Yılmaz, Çağatay and Yıldız, Mehmet (2017) "A study on correlating reduction in Poisson's ratio with transverse crack and delamination through acoustic emission signals", Polymer Testing, Vol.63, 47-53 (SCI)

Sohouli, A. and Yıldız, Mehmet and Suleman, A. (2017) "Design optimization of thin-walled composite structures based on material and fiber orientation", Composite Structures, Vol.176, 1081-1095 (SCI)

Rahmat, Amin and Koç, Bahattin and Yıldız, Mehmet (2017) "A systematic study on numerical simulation of electrified jet printing". Published Online First http://dx.doi.org/10.1016/j.addma.2017.08.004

Seyyed Monfared Zanjani, Jamal and Saner Okan, Burcu and Yılmaz, Çağatay and Menceloğlu, Yusuf Z. and Yıldız, Mehmet (2017) "Monitoring the interface and bulk self-healing capability of tri-axial electrospun fibers in glass fiber reinforced epoxy composites", Composites Part A: Applied Science and Manufacturing, Vol.99, 221-232 (SCI)

Ullah, Mohib and Seyyed Monfared Zanjani, Jamal and Haghighi Poudeh, Leila and Siddiq, M. and Saner Okan, Burcu and Yıldız, Mehmet and Menceloğlu, Yusuf Z. (2017) "Manufacturing functionalized mono-crystalline diamond containing electrospun fibers reinforced epoxy composites with improved mechanical characteristics", Diamond and Related Materials, Vol.76, 90-96 (SCI)

Ghorbani, Morteza and Sadaghiani, Abdolali Khalili and Yıldız, Mehmet and Koşar, Ali (2017) "Experimental and numerical investigations on spray structure under the effect of cavitation phenomenon in a microchannel", Journal of Mechanical Science and Technology, Vol.31, No.1, 235-247 (SCI)

Kocaman, Esat Selim and Akay, Erdem and Yılmaz, Çağatay and Türkmen, Halit Süleyman and Mısırlıoğlu, Burç and Suleman, Afzal and Yıldız, Mehmet (2017) "Monitoring the damage state of fiber reinforced composites using an FBG network for failure prediction", Materials, Vol.10, No.1 (SCI)

Khalili Sadaghiani, Abdolali and Yıldız, Mehmet and Koşar, Ali (2016) "Numerical modeling of convective heat transfer of thermally developing nanofluid flows in a horizontal microtube", International Journal of Thermal Sciences, Vol.109, 54-69 (SCI)

Khani, Navid and Yıldız, Mehmet and Koç, Bahattin (2016) "Elastic properties of coiled carbon nanotube reinforced nanocomposite: a finite element study", Materials & Design, Vol.109, 123-132 (SCI)

Tofighi, Nima and Özbulut, Murat and Feng, James J. and Yıldız, Mehmet (2016) "The effect of normal electric field on the evolution of immiscible Rayleigh-Taylor instability", Theoretical and Computational Fluid Dynamics, Vol.30, No.5, 469-483 (SCI)

Akay, Erdem and Yılmaz, Çağatay and Kocaman, Esat Selim and Türkmen, Halit S. and Yıldız, Mehmet (2016) "Monitoring Poisson's ratio degradation of FRP composites under fatigue loading using biaxially embedded FBG sensors", Materials, Vol.9, No.9 (SCI)

Yılmaz, Çağatay and Akalın, Çağdaş and Kocaman, Esat Selim and Suleman, A. and Yıldız, Mehmet (2016) "Monitoring Poisson's ratio of glass fiber reinforced composites as damage index using biaxial Fiber Bragg Grating sensors", Polymer Testing, Vol.53, 98-107 (SCI)

Ghorbani, Morteza and Yıldız, Mehmet and Gözüaçık, Devrim and Koşar, Ali (2016) "Cavitating nozzle flows in micro- and minichannels under the effect of turbulence", Journal of Mechanical Science and Technology, Vol.30, No.6, 2565-2581 (SCI)

Keulen, Casey J. and Akay, Erdem and Melemez, Fazlı Fatih and Kocaman, Esat Selim and Deniz, Ataman and Yılmaz, Çağatay and Boz, Talha and Yıldız, Mehmet and Türkmen, Halit S. and Suleman, Afzal (2016) "Prediction of fatigue response of composite structures by monitoring the strain energy release rate with embedded fiber Bragg gratings", Journal of Intelligent Material Systems and Structures, Vol.27, No.1, 17-27 (SCI)

Seyyed Monfared Zanjani, Jamal and Saner Okan, Burcu and Menceloğlu, Yusuf Z. and Yıldız, Mehmet (2016) "Nano-engineered design and manufacturing of high-performance epoxy matrix composites with carbon fiber/selectively integrated graphene as multi-scale reinforcements", RSC Advances, Vol.6, No.12, 9495-9506 (SCI)

Haghighi Poudeh, Leila and Saner Okan, Burcu and Seyyed Monfared Zanjani, Jamal and Yıldız, Mehmet and Menceloğlu, Yusuf Z. (2015) "Design and fabrication of hollow and filled graphene-based polymeric spheres via core-shell electrospraying", RSC Advances, Vol.5, No.111, 91147-91157 (SCI)

Mısırlıoğlu, Burç and Yıldız, Mehmet and Şendur, Kürşat (2015) "Domain control of carrier density at a semiconductor-ferroelectric interface", Scientific Reports, Vol.5 (SCI)

Tofighi, Nima and Özbulut, Murat and Rahmat, Amin and Feng, James J. and Yıldız, Mehmet (2015) "An incompressible smoothed particle hydrodynamics method for the motion of rigid bodies in fluids", Journal of Computational Physics, Vol.297, 207-220 (SCI)

Demircan, Özgür and Yılmaz, Çağatay and Kocaman, Esat Selim and Tang, S. and Hamada, H. and Yıldız, Mehmet (2015) "Effect of fiber densities on impact properties of biaxial warp-knitted textile composites", Journal of Reinforced Plastics and Composites, Vol.34, No.16, 1287-1297 (SCI)

Seyyed Monfared Zanjani, Jamal and Saner Okan, Burcu and Menceloğlu, Yusuf Z. and Yıldız, Mehmet (2015) "Design and fabrication of multi-walled hollow nanofibers by triaxial electrospinning as reinforcing agents in nanocomposites", Journal of Reinforced Plastics and Composites, Vol.34, No.16, 1273-1286 (SCI)

Seyyed Monfared Zanjani, Jamal and Saner Okan, Burcu and Letofsky-Papst, Ilse and Menceloğlu, Yusuf Z. and Yıldız, Mehmet (2015) "Repeated self-healing of nano and micro scale cracks in epoxy based composites by tri-axial electrospun fibers including different healing agents", RSC Advances, Vol.5, No.89, 73133-73145 (SCI)

Kocaman, Esat Selim and Keulen, Casey J. and Akay, Erdem and Yıldız, Mehmet and Türkmen, Halit S. and Suleman, Afzal (2015) "An experimental study on the effect of length and orientation of embedded FBG sensors on the signal properties under fatigue loading". Published Online First http://dx.doi.org/10.1515/secm-2014-0029

Shadloo, Mostafa S. and Weiss, Robert and Yıldız, Mehmet and Dalrymple, Robert A. (2015) "Numerical simulation of long wave runup for breaking and nonbreaking waves", International Journal of Offshore and Polar Engineering, Vol.25, No.1, 1-7 (SCI)

Shojaeian, Mostafa and Yıldız, Mehmet and Koşar, Ali (2015) "Convective heat transfer and second law analysis of non-Newtonian fluid flows with variable thermophysical properties in circular channels", International Communications in Heat and Mass Transfer, Vol.60, 21-31 (SCI)

Zanjani, Jamal Seyyed Monfared and Saner Okan, Burcu and Letofsky-Papst, Ilse and Yıldız, Mehmet and Menceloğlu, Yusuf Z. (2015) "Rational design and direct fabrication of multi-walled hollow electrospun fibers with controllable structure and surface properties", European Polymer Journal (SI), Vol.62, 66-76 (SCI)

Rahmat, Amin and Tofighi, Nima and Safdari Shadloo, Mostafa and Yıldız, Mehmet (2014) "Numerical simulation of wall bounded and electrically excited Rayleigh-Taylor instability using incompressible smoothed particle hydrodynamics", Colloids and Surfaces A: Physicochemical and Engineering Aspects, Vol.460, 60-70 (SCI)

Shojaeian, Mostafa and Yıldız, Mehmet and Koşar, Ali (2014) "Heat transfer characteristics of plug flows with temperature-jump boundary conditions in parallel-plate channels and concentric annuli", International Journal of Thermal Sciences, Vol.84, 252-259 (SCI)

Mısırlıoğlu, Burç and Yıldız, Mehmet (2014) "Carrier accumulation near electrodes in ferroelectric films due to polarization boundary conditions", Journal of Applied Physics, Vol.116, No.2 (SCI)

Özbulut, Murat and Yıldız, Mehmet and Gören, Ömer (2014) "A numerical investigation into the correction algorithms for SPH method in modeling violent free surface flows", International Journal of Mechanical Sciences, Vol.79, 56-65 (SCI)

Özel, Burcu and Örüm, Aslıhan and Yıldız, Mehmet and Menceloğlu, Yusuf Z. (2014) "Experimental study on the rheology of anisotropic, flocculated and low volume fraction colloids", Korea-Australia Rheology Journal, Vol.26, No.1, 105-116 (SCI)

Keulen, Casey J. and Yıldız, Mehmet and Suleman, Afzal (2014) "Damage detection of composite plates by Lamb wave ultrasonic tomography with a sparse hexagonal network using damage progression trends", Shock and Vibration (SCI)

Mısırlıoğlu, Burç and Yıldız, Mehmet (2013) "Very large dielectric response from ferroelectric nanocapacitor films due to collective surface and strain relaxation effects", Journal of Applied Physics, Vol.114, No.19 (SCI)

Safdari Shadloo, Mostafa and Rahmat, Amin and Yıldız, Mehmet (2013) "A smoothed particle hydrodynamics study on the electrohydrodynamic deformation of a droplet suspended in a neutrally buoyant Newtonian fluid", Computational Mechanics, Vol.52, No.3, 693-707 (SCI)

Tofighi, Nima and Yıldız, Mehmet (2013) "Numerical simulation of single droplet dynamics in three-phase flows using ISPH", Computers and Mathematics with Applications, Vol.66, No.4, 525-536 (SCI)

Sadek, Samir Hassan Mahmoud and Yıldız, Mehmet (2013) "Modeling die swell of second-order fluids using smoothed particle hydrodynamics", Journal of Fluids Engineering, Vol.135, No.5 (SCI)

Safdari Shadloo, Mostafa and Zainali, Amir and Yıldız, Mehmet (2013) "Simulation of single mode Rayleigh-Taylor instability by SPH method", Computational Mechanics, Vol.51, No.5, 699-715 (SCI)

Mısırlıoğlu, Burç and Yıldız, Mehmet (2013) "Dielectric response of fully and partially depleted ferroelectric thin films and inversion of the thickness effect", Journal of Physics D: Applied Physics, Vol.46, No.12 (SCI)

Zainali, Amir and Tofighi, Nima and Safdari Shadloo, Mostafa and Yıldız, Mehmet (2013) "Numerical investigation of Newtonian and non-Newtonian multiphase flows using ISPH method", Computer Methods in Applied Mechanics and Engineering, Vol.254, 99-113 (SCI)

Kurtoğlu, Evrim and Bilgin, Alp and Şeşen, Muhsincan and Mısırlıoğlu, Burç and Yıldız, Mehmet and Acar, Funda Yağcı and Koşar, Ali (2012) "Ferrofluid actuation with varying magnetic fields for micropumping applications", Microfluidics and Nanofluidics (Sl), Vol.13, No.4, 683-694 (SCI)

Yıldız, Mehmet and Özdemir, Nazlı Gülsine and Bektaş, Gökhan and Keulen, Casey J. and Boz, Talha and Şengün, Ege Fikri and Öztürk, Cem and Menceloğlu, Yusuf Z. and Suleman, Afzal (2012) "An experimental study on the process monitoring of resin transfer molded composite structures using fiber optic sensors", Journal of Manufacturing Science and Engineering - Transactions of ASME, Vol.134, No.4 (SCI)

Mısırlıoğlu, Burç and Çöloğlu, Hale Nur and Yıldız, Mehmet (2012) "Thickness driven stabilization of saw-tooth-like domains upon phase transitions in ferroelectric thin films with depletion charges", Journal of Applied Physics, Vol.111, No.6 (SCI)

Shadloo, Mostafa Safdari and Zainali, Amir and Yıldız, Mehmet and Suleman, Afzal (2012) "A robust weakly compressible SPH method and its comparison with an incompressible SPH", International Journal for Numerical Methods in Engineering, Vol.89, No.8, 939-956 (SCI)

Mısırlıoğlu, Burç and Yıldız, Mehmet (2012) "Polarization retention and switching in ferroelectric nanocapacitors with defects on tensile substrates", Solid State Electronics, Vol.67, No.1, 38-44 (SCI)

Shadloo, Mostafa Safdari and Yıldız, Mehmet (2011) "Numerical modeling of Kelvin-Helmholtz instability using smoothed particle hydrodynamics", International Journal for Numerical Methods in Engineering, Vol.87, No.10, 988-1006 (SCI)

Keulen, Casey J. and Yıldız, Mehmet and Suleman, Afzal (2011) "Multiplexed FBG and etched fiber sensors for process and health monitoring of 2-&3-D RTM components", Journal of Reinforced Plastics and Composites, Vol.30, No.12, 1055-1064 (SCI)

Shadloo, Mostafa Safdari and Zainali, Amir and Sadek, Samir H. and Yıldız, Mehmet (2011) "Improved incompressible smoothed particle hydrodynamics method for simulating flow around bluff bodies", Computer Methods in Applied Mechanics and Engineering, Vol.200, No.9-12, 1008-1020 (SCI)

Armour, Neil and Yıldız, Mehmet and Yıldız, Emine and Dost, Sadık (2008) "Liquid phase diffusion growth of SiGe single crystals under magnetic fields", ECS Transactions, Vol.10, No.16, 135-146 ()

Yıldız, Mehmet and Rook, Rusty and Suleman, Afzal (2008) "SPH with the multiple boundary tangent method", International Journal for Numerical Methods in Engineering (SCI)

Kefal, Adnan and Emami Tabrizi, Isa and Yıldız, Mehmet, "Real-Time monitoring of crack propagation in fiber-reinforced composite plates using iFEM methodology", Developments in the Analysis and Design of Marine Structures: Proceedings of the 8th International Conference on Marine Structures (MARSTRUCT 2021, 7-9 June 2021, Trondheim, Norway), Amdahl, Jorgen and Soares, C. Guedes (eds.), London: CRC Press, December 2021, 345-353

Seyyed Monfared Zanjani, Jamal and Beylergil, Bertan and Haghighi Poudeh, Leila and Alkhateab, Baidaa and Menceloğlu, Yusuf Z. and Yıldız, Mehmet, "Effect of nanomaterials/nanofibers on the structure and properties of fiber-reinforced composites", Fiber-Reinforced Nanocomposites: Fundamentals and Applications, Han, Baoguo and Sharma, Sumit and Nguyen, Tuan Anh and Longbiao, Li and Bhat, K. Subrahmanya (eds.), Amsterdam: Elsevier, August 2020, 157-182

Haghighi Poudeh, Leila and Yıldız, Mehmet and Menceloğlu, Yusuf Z. and Saner Okan, Burcu, "Three-dimensional graphene-based structures: production methods, properties, and applications", Handbook of Graphene: Growth, Synthesis, and Functionalization, Celasco, Edvige and Chaika, Alexander N. (eds.), USA: Wiley-Scrivener, July 2019, 359-387

Seyyed Monfared Zanjani, Jamal and Oğuz, Oğuzhan and Saner Okan, Burcu and Yıldız, Mehmet and Menceloğlu, Yusuf Z., "Polymer composites containing functionalized nanoparticles and the environment", Polymer Composites with Functionalized Nanoparticles: Synthesis, Properties, and Applications, Pielichowski, Krzysztof and Majka, Tomasz (eds.), Amsterdam: Elsevier, January 2019, 437-466

Seyyed Monfared Zanjani, Jamal and Saner Okan, Burcu and Menceloğlu, Yusuf Z. and Yıldız, Mehmet, "Self-healing thermosetting composites: concepts, chemistry and future advances", Hybrid Organic‐Inorganic Interfaces: Towards Advanced Functional Materials, Delville, Marie-Helene and Taubert, Andreas (eds.), UK: Wiley, September 2018

Rocha, B. and Silva, C. and Keulen, C. and Yıldız, Mehmet and Suleman, A., "New trends in SHM, structural health monitoring of aircraft structures", New Trends in Structural Health Monitoring, Wieslaw, Ostachowicz and Güemes, Alfredo (eds.), Germany: Springer, January 2013

Esin, Yeşim Hümay and Ünel, Mustafa and Yıldız, Mehmet, "Formation control of multiple robots using parametric and implicit representations", Advanced Intelligent Computing Theories and Applications. With Aspects of Artificial Intelligence, Huang, D.-S. (ed.), Berlin / Heidelberg: Springer 2008, 558-565