| Mühendislik ve Doğa Bilimleri Fakültesi

Lütfi Taner Tunç Mühendislik ve Doğa Bilimleri Fakültesi Öğretim Üyesi (216) 300 1301 tanertuncsabanciunivedu

Personal Web

http://myweb.sabanciuniv.edu/ttunc/

Jobs

Öğretim Üyesi

Education

2010 - Sabanci Universitesi, Endüstri Mühendisliği, Doktora

2006 - Sabanci Universitesi, Endüstri Mühendisliği,Y.Lisans

2004 - Orta Doğu Teknik Üniversitesi, Makine Müh., Lisans

Areas of Interest

Çok eksenli frezeleme. Takım tezgahları dinamiği, Metal kesme dinamiği. Takım yolu hesaplama. Robotik frezeleme.

Memberships

CIRP Associate Üye

Tunç, Lütfi Taner and Sheikhi, Mohammad and Moldovan, Catalin and Gutiu, Eugen and Balc, Nicolae (2024) "Non-planar 5-axis directional additive manufacturing of plastics: machine, process, and tool path", Manufacturing Letters, Vol.41, 959-964 (ESCI)

Zemzemoğlu, Muhammed and Ünel, Mustafa and Tunç, Lütfi Taner (2024) "Enhancing automated fiber placement process monitoring and quality inspection: a hybrid thermal vision based framework", Composites Part B: Engineering, Vol.285 (SCI)

Sheikhi, Mohammad and Anamagh, Mirmeysam Rafiei and Bediz, Bekir and Tunç, Lütfi Taner (2024) "Conical-shaped variable stiffness composite laminates: design and fiber path planning", Materials and Design, Vol.244 (SCI)

Tunç, Lütfi Taner and Gulmez, Deniz Arda (2024) "Tool path strategies for efficient milling of thin-wall features", Journal of Manufacturing and Materials Processing, Vol.8, No.4 (ESCI)

Sheikhi, Mohammad and Rafiei Anamagh, Mirmeysam and Bediz, Bekir and Tunç, Lütfi Taner (2024) "Design of manufacturable variable stiffness composite laminates using spectral Chebyshev and normalized cut segmentation methods", Composite Structures, Vol.330 (SCI)

Tunç, Lütfi Taner and Sheikhi, Mohammad (2023) "AFP tool path planning for manufacture of variable stiffness composites", CIRP Annals, Vol.72, No.1, 381-384 (SCI)

Iglesias, Alexander and Tunç, Lütfi Taner and Özsahin, Orkun and Franco, Oier and Munoa, Jokin and Budak, Erhan (2022) "Alternative experimental methods for machine tool dynamics identification: a review", Mechanical Systems and Signal Processing, Vol.170 (SCI)

Bilal, Diyar Khalis and Ünel, Mustafa and Tunç, Lütfi Taner and Gönül, Bora (2022) "Development of a vision based pose estimation system for robotic machining and improving its accuracy using LSTM neural networks and sparse regression", Robotics and Computer Integrated Manufacturing, Vol.74 (SCI)

Balanji, Hamid Majidi and Turgut, Ali Emre and Tunç, Lütfi Taner (2022) "A novel vision-based calibration framework for industrial robotic manipulators", Robotics and Computer Integrated Manufacturing, Vol.73 (SCI)

Poyraz, Özgür and Yasa, Evren and Tunç, Lütfi Taner and Kilicay, Koray (2021) "Parametric simulations for residual stresses and distortions of Inconel 625 fabricated by laser powder bed fusion additive manufacturing", Journal of Additive Manufacturing Technologies, Vol.1, No.2 (NA)

Tunç, Lütfi Taner and Gönül, Bora (2021) "Effect of quasi-static motion on the dynamics and stability of robotic milling", CIRP Annals, Vol.70, No.1, 305-308 (SCI)

Özcan, Yiğit and Tunç, Lütfi Taner and Kopacka, Jan and Çetin, Beril and Sulitka, Matej (2021) "Modelling and simulation of controlled depth abrasive water jet machining (AWJM) for roughing passes of free-form surfaces", International Journal of Advanced Manufacturing Technology, Vol.114, No.11-12, 3581-3596 (SCI)

Verl, Alexander and Valente, Anna and Melkote, Shreyes and Brecher, Christian and Ozturk, E. and Tunç, Lütfi Taner (2019) "Robots in machining", CIRP Annals, Vol.68, No.2, 799-822 (SCI)

Tunç, Lütfi Taner (2019) "Effect of MQL conditions on milling of AISI 316L type stainless steeels [AISI 316L tipi paslanmaz çeliklerin frezelemesinde MQL şartlarının takım ömrüne etkisi]", Journal of the Faculty of Engineering and Architecture of Gazi University, Vol.34, No.4, 1665-1677 (SCI)

Tunç, Lütfi Taner (2019) "Smart tool path generation for 5-axis ball-end milling of sculptured surfaces using process models", Robotics and Computer Integrated Manufacturing, Vol.56, 212-221 (SCI)

Tunç, Lütfi Taner and Zatarain, Mikel (2019) "Stability optimal selection of stock shape and tool axis in finishing of thin-wall parts", CIRP Annals - Manufacturing Technology, Vol.68, No.1, 401-404 (SCI)

Tunç, Lütfi Taner and Mohammadi, Yaser and Budak, Erhan (2018) "Destabilizing effect of low frequency modes on process damped stability of multi-mode milling systems", Mechanical Systems and Signal Processing, Vol.111, 423-441 (SCI)

Tunç, Lütfi Taner and Ozsahin, Orkun (2018) "Use of inverse stability solutions for identification of uncertainties in the dynamics of machining processes", Advances in Manufacturing, Vol.6, No.3, 308-318 (SCI)

Tunç, Lütfi Taner (2018) "Prediction of tool tip dynamics for generalized milling cutters using the 3D model of the tool body", International Journal of Advanced Manufacturing Technology, Vol.95, No.5-8, 1891-1909 (SCI)

Özkırımlı, Ömer Mehmet and Tunç, Lütfi Taner and Budak, Erhan (2016) "Generalized model for dynamics and stability of multi-axis milling with complex tool geometries", Journal of Materials Processing Technology, Vol.238, 446-458 (SCI)

Tunç, Lütfi Taner (2016) "Rapid extraction of machined surface data through inverse geometrical solution of tool path information", International Journal of Advanced Manufacturing Technology, Vol.87, No.1-4, 353-362 (SCI)

Tunç, Lütfi Taner and Özkırımlı, Ömer Mehmet and Budak, Erhan (2015) "Generalized cutting force model in multi-axis milling using a new engagement boundary determination approach", International Journal of Advanced Manufacturing Technology, Vol.77, No.1-4, 341-355 (SCI)

Tunç, Lütfi Taner and Budak, Erhan (2013) "Identification and modeling of process damping in milling", Journal of Manufacturing Science and Engineering, Vol.135, No.2 (SCI)

Tunç, Lütfi Taner and Budak, Erhan (2012) "Effect of cutting conditions and tool geometry on process damping in machining", International Journal of Machine Tools and Manufacture, Vol.57, 10-19 (SCI)

Budak, Erhan and Tunç, Lütfi Taner and Alan, Salih and Özgüven, H. Nevzat (2012) "Prediction of workpiece dynamics and its effects on chatter stability in milling", CIRP Annals - Manufacturing Technology, Vol.61, No.1, 339-342 (SCI)

Öztürk, Erdem and Tunç, Lütfi Taner and Budak, Erhan (2011) "Analytical methods for increased productivity in five-axis ball-end milling", International Journal of Mechatronics and Manufacturing Systems (IJMMS), Vol.4, No.3/4, 238-265 (NA)

Budak, Erhan and Tunç, Lütfi Taner (2010) "Identification and modeling of process damping in turning and milling using a new approach", CIRP Annals - Manufacturing Technology, Vol.59, No.1, 403-408 (SCI)