Ay, Ayşe and Arel, Işık and Dumanli, Ahu Gümrah and Akbulut, Özge (2024) "Coaxial direct ink writing of core-shell meshes enables zero-waste room temperature encapsulation of multivariate fertilizers", Colloids and Surfaces A: Physicochemical and Engineering Aspects, Vol.691 (SCI)
Zandonà, Chiara and Roberti, Andrea and Costanzi, Davide and Gül, Burçin and Akbulut, Özge and Fiorini, Paolo and Calanca, Andrea (2024) "A comparison between kinematic models for robotic needle insertion with application into transperineal prostate biopsy", Technologies, Vol.12, No.3 (ESCI)
Arel, Işık and Ay, Ayşe and Wang, Jingyi and Gil-Herrera, Luz Karime and Dumanli, Ahu Gümrah and Akbulut, Özge (2023) "Encapsulation of carbon dots in a core-shell mesh through coaxial direct ink writing for improved crop growth", ACS Sustainable Chemistry and Engineering, Vol.11, No.38, 13939-13949 (SCI)
Özhan, Aleyna Beste and Demir, Gizem and Akbulut, Özge (2023) "Local optimization of low power laser machining of MgO at the green state enables cost- and energy-efficient benchtop fabrication", Journal of Manufacturing Processes, Vol.98, 206-215 (SCI)
Balcerowski, Tadeusz and Özbek, Burak and Akbulut, Özge and Dumanli, Ahu Gümrah (2023) "Hierarchical organization of structurally colored cholesteric phases of cellulose via 3D printing", Small, Vol.19, No.8 (SCI)
Kirtay, Hicret and Akbulut, Özge and Arsu, Nergis (2022) "Spontaneously designed, self-assembled and oriented ZnO nanorods by photoinduced polymerization of epoxydiacrylate formulation in the presence of 2-mercapto-thioxanthone", Progress in Organic Coatings, Vol.172 (SCI)
Zemberekçi, Lyn and Demir, Gizem and Akaoğlu, Can and Al-dulaimi, Wael Ali Saeed and Özhan, Aleyna Beste and Gülgün, Mehmet Ali and Akhlaghi, Omid and Akbulut, Özge (2021) "Polymer bridging induced by a single additive imparts easy-to-implement green machinability to yttria-stabilized zirconia", ACS Applied Polymer Materials, Vol.3, No.11, 5397-5404 (SCI)
Goharibajestani, Zahra and Akhlaghi Baghoojari, Omid and Akaoğlu, Can and Afghah, Ferdows and Khani, Navid and Hodaei, Amin and Koç, Bahattin and Akbulut, Özge (2019) "Incorporating steric hindrance into the additive design enables a robust formulation of alumina ink for extrusion-based 3D printing", ACS Applied Polymer Materials, Vol.1, No.12, 3279-3285 (SCI)
Gül, Burçin and Kılıç, Deniz and Aslan, Dilan and Bayramiçli, Mehmet and Akbulut, Özge (2019) "Silicone-based simulation models for peripheral nerve microsurgery", Journal of Plastic Reconstructive & Aesthetic Surgery, Vol.72, No.3, 477-483 (SCI)
Gül, Burçin and Kılıç, Deniz and Bozkurt, Ayhan and Arıbal, Mustafa Erkin and Akbulut, Özge (2018) "Silicone-based composite materials simulate breast tissue to be used as ultrasonography training phantoms", Ultrasonics, Vol.88, 9-15 (SCI)
Hodaei, Amin and Akhlaghi Baghoojari, Omid and Khani, Navid and Aytaş, Tunahan and Sezer, Dilek and Tatlı, Buse and Menceloğlu, Yusuf Z. and Koç, Bahattin and Akbulut, Özge (2018) "Single additive enables 3D printing of highly loaded iron oxide suspensions", ACS Applied Materials & Interfaces, Vol.10, No.11, 9873-9881 (SCI)
Akhlaghi Baghoojari, Omid and Aytaş, Tunahan and Tatlı, Buse and Sezer, Dilek and Hodaei, Amin and Favier, Aurelie and Scrivener, Karen and Menceloğlu, Yusuf Z. and Akbulut, Özge (2017) "Modified poly(carboxylate ether)-based superplasticizer for enhanced flowability of calcined clay-limestone-gypsum blended Portland cement", Cement and Concrete Research, Vol.101, 114-122 (SCI)
Akbulut, Özge (2017) "Çok fazlı sistemlerde hücre ayrıştırılması", Uludağ University Journal of The Faculty of Engineering, Vol.22, No.1, 65-80 (NA)
Akhlaghi Baghoojari, Omid and Menceloğlu, Yusuf Z. and Akbulut, Özge (2016) "Rheological behavior of poly(acrylonitrile) concentrated solutions: effect of Sb2O3 nanoparticles on shear and extensional flow", Colloid and Polymer Science, Vol.294, No.9, 1463-1473 (SCI)
Güven, Zekiye Pelin and Üstbaş, Burçin and Harkness, Kellen M. and Coşkun, Hikmet and Joshi, Chakra P. and Besong, Tabot M. D. and Stellacci, Francesco and Bakr, Osman M. and Akbulut, Özge (2016) "Synthesis and characterization of mixed ligand chiral nanoclusters", Dalton Transactions, Vol.45, No.28, 11297-11300 (SCI)
Avcı, Gökay and Akhlaghi Baghoojari, Omid and Üstbaş, Burçin and Özbay, Ceren and Menceloğlu, Yusuf Z. and Akbulut, Özge (2016) "A PCE-based rheology modifier allows machining of solid cast green bodies of alumina", Ceramics International, Vol.42, No.3, 3757-3761 (SCI)
Akhlaghi Baghoojari, Omid and Akbulut, Özge and Menceloğlu, Yusuf Z. (2015) "Shear and extensional rheological characterization of poly(acrylonitrile)/halloysite nanocomposite solutions", European Polymer Journal, Vol.73, 17-25 (SCI)
