Skip to main content
Gözde İnce Faculty of Engineering and Natural Sciences Faculty Member (216) 483 9878 gozdeincesabanciunivedu
Jobs

Faculty Member


Education

Ph.D. in Mechanical Engineering, Boston University, 2007;
B.Sc. in Physics, Bogazici University, 2001.

Areas of Interest

Design and synthesis of biomaterials, smart materials for controlled drug delivery, functional coatings for biosensors and flexible sensors, smart membranes for separation, chemical vapor deposition of thin film coatings

Memberships

American Chemical Society Materials Research Society American Vacuum Society

Article
Book Section / Chapter
Publications Prior to SU

 

 

S. Sayin, A. Tufani, M. Emanet, G. G. Genchi, O. Sen, S. Shemshad, E. Ozdemir, G. Ciofani, G. Ozaydin Ince (2019) “Electrospun Nanofibers With pH-Responsive Coatings for Control of Release”, Front. Bioeng. Biotechnol. 7:309. DOI: 10.3389/fbioe.2019.00309.

 

S. Sayin, E. Ozdemir, E. Acar, G. Ozaydin Ince (2019) "Multifunctional one dimensional polymeric nanostructures for drug delivery and biosensor applications", Nanotechnology 30, 412001. 

 

A. Tufani, G. Ozaydin Ince, (2019) "Protein gating by vapor deposited Janus Membranes", Journal of Membrane Science 575, 126-134.

 

T. Ormanci-Acar, F. Celebi, B. Keskin, O. Mutlu-Salmanlı, M. Agtas, T. Turken, A. Tufani, D. Y. Imer, G. Ozaydin Ince, T. U. Demir, Y. Z. Menceloglu, S. Unal, I. Koyuncu, (2018) “Fabrication and characterization of temperature and pH resistant thin film nanocomposite membranes embedded with halloysite nanotubes for dye rejection”, Desalination 429, 20-32.

 

E. Bakirci, B. Toprakhisar, M.C. Zeybek, G. Ozaydin Ince, B. Koc, (2017) "Cell sheet based bionk for 3D bioprinting applications", Biofabrication 9(2), 024105. 

 

A. Tufani, G. Ozaydin Ince, (2017) "Smart membranes with pH-responsive control of macromolecule permeability", Journal of Membrane Science 537, 255-262. 

 

A.Balkan, E. Armagan, G. Ozaydin Ince, (2017) "Synthesis of coaxial nanotubes of polyaniline and poly(hydroxyethyl methacrylate) by oxidative/initiated chemical vapor deposition", Beilstein J. Nanotechnology 8, 872-882. 

 

M. Nedaei, A.R. Motezakker, M.C. Zeybek, M. Sezen, G. Ozaydin Ince, A. Koşar, (2017) "Subcooled flow boiling heat transfer enhancement using polyperfluorodecylacrylate (pPFDA) coated microtubes with different coating thicknesses", Experimental Thermal and Fluid Science 86, 130-140.

 

A.K., Sadaghiani, A.R. Motezakker, A.V. Ozpinar, G. Ozaydin Ince, A. Koşar, (2017) "Pool boiling heat transfer characteristics of inclined pHEMA (polyhydroxyethylmethacrylate) coated surfaces", Journal of Heat Transfer 139 (11), 111501.

 

S. Khabbaz Abkenar, A. Tufani, G. Özaydın İnce, H. Kurt, A. Turak, C. Ow-Yang, (2017) “Transfer printing gold nanoparticle arrays by tuning the surface hydrophilicity of thermo-responsive poly n-isopropylacrylamide (pNIPAAm)”, Nanoscale, 9 (9), 2969-2973.

 

M. Nedaei, E. Armagan, M. Sezen, G. Ozaydin-Ince and A. Koşar, (2016) "Enhancement of Flow Boiling Heat Transfer in pHEMA/pPFDA Coated Microtubes with Longitudinal Variations in Wettability," AIP Advances, 6, 035212.

 

E. Armagan, G. Ozaydin Ince, (2015) "Coaxial nanotubes of stimuli responsive polymers with tunable release kinetics", Soft Matter, 11, 8069-8075 (2015).

M. Yilmaz, H. B. Kuloglu, H. Erdogan, S. S. Cetin, M. S. Yavuz, G. Ozaydin Ince, G. Demirel, "Light-Driven Unidirectional Liquid Motion on Anistropic Gold Nanorod Arrays", Advanced Materials Interfaces, 2 (12), (2015). DOI: 10.1002/admi.201500226.

 

A. Tufani, G. Ozaydin Ince, “Permeability of small molecules through vapor deposited polymer membranes”, Journal of Applied Polymer Science, 132 (34), (2015). DOI: 10.1002/app.42453.

 

E. Armagan, P. Qureshi, G. Ozaydin Ince, "Functional Nanotubes for Triggered Release of Molecules", Nanoscience and Nanotechnology Letters 7, 79-83 (2015).

 

R. Demiryurek, M. Kassim Ali, G. Ozaydin Ince, “A facile method for fabrication of responsive micropatterned surfaces”, Smart Mater. Struct. 23, 095020 (2014).

 

T. Çıkım, E. Armagan, G. Ozaydin Ince, A. Koşar, “Flow Boiling Enhancement in Microtubes With Crosslinked pHEMA Coatings and the Effect of Coating Thickness”, J. Heat Transfer 136, 081504 (2014). 

 

C. D. Petruczok , E. Armagan , G. Ozaydin Ince , K. K. Gleason, "Initiated Chemical Vapor Deposition and Light-Responsive Cross-Linking of Poly(vinyl cinnamate) Thin Films", Macromol. Rapid Commun. 35, 1345-1350 (2014).

 

 A. Kaya, R. Demiryürek, E. Armağan, G. Özaydın-İnce, M. Sezen, A. Koşar, “Boiling heat transfer enhancement in mini/microtubes via polyhydroxyethylmethacrylate (pHEMA) coatings on inner microtube walls at high mass fluxes”, J. Micromech. Microeng., 23, 115017 (2013). 

 

G. Ozaydin Ince, E. Armagan, H. Erdogan, F. Buyukserin, L. Uzun, G. Demirel, "One-Dimensional Surface-Imprinted Polymeric Nanotubes for Specific Biorecognition by Initiated Chemical Vapor Deposition (iCVD)", ACS Appl. Mater. Interfaces, 5 (14), 6447 (2013).

 

G. Ozaydin-Ince, A. Matin, Z. Khan, S.M.J. Zaidi, K. K. Gleason, “Surface Modification of Reverse Osmosis Desalination Membranes by Thin-Film Coatings Deposited by Initiated Chemical Vapor Deposition”, Thin Solid Films, 539, 181 (2013).

 

G. Ozaydin-Ince, A. M. Coclite, K. K. Gleason, “Chemical Vapor Deposition of Polymeric Thin Films: Applications in Sensors, Biotechnology, Microelectronics/Organic Electronics, Micro-fluidics, MEMS, Composites, and Membranes”, Reports on Progress in Physics, 75, 016501 (2012).

 

A. Matin, G. Ozaydin-Ince, Z. Khan, S.M. J. Zaidi, K. Gleason, D. Eggenspieler, “Random Copolymer Films as Potential Antifouling Coatings for Reverse Osmosis Membranes”,  Desalination and Water Treatment, 34, 100 (2011). 

 

H. Tekin, G. Ozaydin-Ince, T. Tsinman, K. K. Gleason, R. Langer, A. Khademhosseini, M. C. Demirel, “Responsive Microgrooves for the Formation of Harvestable Tissue Constructs”,  Langmuir, 27, 5671 (2011).

 

G. Ozaydin-Ince, M. Dubach, K. K. Gleason, H. A. Clark, “Microworm optode sensors limit particle diffusion to enable in vivo measurements”, PNAS, 108, 2656 (2011).

 

R. Yang, J. Xu, G. Ozaydin-Ince, S. Y. Wong, K. K. Gleason, “Surface-tethered zwitterionic ultrathin antifouling coatings on reverse osmosis membranes by initiated chemical vapor deposition”, Chemistry of Materials, 23, 1263 (2011).

 

G. Ozaydin-Ince, K. K. Gleason, M. C. Demirel, “A stimuli-responsive coaxial nanofilm for burst release”, Soft Matter, 7, 638 (2011).

 

N. J. Kramer, E. Sachteleben, G. Ozaydin-Ince, R. van de Sanden, K. K. Gleason, “Shape Memory Polymer Thin Films Deposited by Initiated Chemical Vapor Deposition”, Macromolecules, 43, 8344 (2010).

 

G. Ozaydin-Ince, G. Demirel, K. K. Gleason, M. C. Demirel, “Highly Swellable Free-Standing Hydrogel Nanotube Forests”,  Soft Matter, 6, 1635 (2010).

 

G. Ozaydin-Ince, K. K. Gleason, “Tunable conformality of polymer coatings on high aspect ratio features”, Chemical Vapor Deposition, 16, 100 (2010).

 

A.M. Coclite, G. Ozaydin-Ince, F. Palumbo, A. Milella, K. K. Gleason, “Single-chamber deposition of multilayer barriers by Plasma Enhanced and initiated Chemical Vapor Deposition of organosilicones”, Plasma Processes and Polymers, 7, 561 (2010).

 

G. Ozaydin-Ince, K. K. Gleason, “Thermal stability of acrylic/methacrylic sacrificial copolymers fabricated by initiated Chemical Vapor Deposition (iCVD)”, J. Electrochem. Soc., 157 (1), D41 (2010). 

 

G. Ozaydin-Ince, K. K. Gleason, “Transition between kinetic and mass transfer regimes in the initiated chemical vapor deposition from ethylene glycol diacrylate”, J. Vac. Sci. Technol. A 27 (5), 1135 (2009). 

 

A. M. Coclite, G. Ozaydin-Ince, R. d’Agostino, K. K. Gleason, “Flexible Cross-linked Organosilicon Thin Films by Initiated Chemical Vapor Deposition”, Macromolecules, 42, 8138 (2009). 

 

M. E. Alf, A. Asatekin, M. C. Barr, S. H. Baxamusa, H. Chelawat, G. Ozaydin-Ince, C. D. Petruczok, R. Sreenivasan, W. E. Tenhaeff, N. J. Trujillo, S. Vaddiraju, J. Xu, K. K. Gleason, “Chemical Vapor Deposition of Conformal, Functional, and Responsive Polymer Films”, Adv. Mater., 21, 1 (2009).  

 

G. Ozaydin-Ince, K. F. Ludwig, “In situ x-ray studies of native and Mo-seeded surface nanostructuring during ion bombardment of Si(100)”, J. Phys.: Condens. Matter 21, 224008 (2009).

 

G. Ozaydin, K. F. Ludwig, Jr., H. Zhou, L. Zhou, R. L. Headrick, “Transition behavior of surface morphology evolution of Si(100) during low-energy normal-incidence Ar+ ion bombardment”, J. Appl. Phys. 103, 033512 (2008).

 

G. Ozaydin, K. F. Ludwig, Jr., H. Zhou, R. L. Headrick, “Effects of Mo seeding on the formation of Si  nanodots during low-energy ion bombardment”, J. Vac. Sci. Technol. B 26 (2), 551 (2008).

 

H. Zhou, L. Zhou, G. Ozaydin, K. F. Ludwig, Jr., R. L. Headrick, “Mechanisms of ultra-smoothing of oxide surfaces induced by ion beam erosion”, Phys. Rev. B 78, 165404 (2008).

H. Zhou, Y. Wang, L. Zhou, R. L. Headrick, A. Ozcan, Y. Wang, G. Ozaydin, K. F. Ludwig, Jr., D. P. Siddons, “Wavelength tunability of ion-bombardment induced ripples on sapphire investigated with small-angle x-ray scattering and atomic force microscopy”, Phys. Rev. B 75, 155416 (2007).

 

G. Ozaydin, A. Ozcan, Y. Wang, K. F. Ludwig, Jr., H. Zhou, R. Headrick, “Real-time x-ray studies of the growth of Mo-seeded Si nanodots by low-energy ion bombardment”, Nucl. Inst. Meth. Phys. Res. B 264, 47 (2007).

 

A. Ozcan, Y. Wang, G. Ozaydin, K. F. Ludwig, Jr., A. Bhattacharyya, T. Moustakas, P. Siddons, “Real-time x-ray studies of gallium adsorption and desorption”, J. Appl. Phys. 100, 084307 (2006).

 

Y. Wang, A. Ozcan, G. Ozaydin, K. F. Ludwig, Jr., A. Bhattacharyya, T. D. Moustakas, H. Zhou, R. L. Headrick, D. P. Siddons, “Real-time synchrotron x-ray studies of low- and high-temperature nitridation of c-plane sapphire”, Phys. Rev. B 74, 235304 (2006).

 

G. Ozaydin, A. Ozcan, Y. Wang, K. F. Ludwig, Jr., H. Zhou, R. Headrick, P. Siddons, “Real-time x-ray studies of Mo-seeded Si nanodot formation during ion bombardment”, Appl. Phys. Lett. 87, 163104, (2005).

Home

FENS Dean's Office

Orta Mahalle, 34956 Tuzla, İstanbul, Türkiye

+90 216 483 96 00

© Sabancı University 2023